Android7.0 亮屏流程分析
原创
Android7.0 亮屏流程分析
原创
朵朵花儿
修改于 2019-12-25 10:44:41
修改于 2019-12-25 10:44:41
代码可运行
运行总次数：0
代码可运行
亮屏的本质是改变屏幕的电源状态
经过一系列的调用会来到PowerManagerService中的updatePowerStateLocked()
private void updatePowerStateLocked() {
if (!mSystemReady || mDirty == 0) {
return;
}
if (!Thread.holdsLock(mLock)) {
Slog.wtf(TAG, "Power manager lock was not held when calling updatePowerStateLocked");
}
try {
// Phase 0: Basic state updates.
updateIsPoweredLocked(mDirty);
updateStayOnLocked(mDirty);
updateScreenBrightnessBoostLocked(mDirty);
// Phase 1: Update wakefulness.
// Loop because the wake lock and user activity computations are influenced
// by changes in wakefulness.
final long now = SystemClock.uptimeMillis();
int dirtyPhase2 = 0;
for (;;) {
int dirtyPhase1 = mDirty;
dirtyPhase2 |= dirtyPhase1;
mDirty = 0;
updateWakeLockSummaryLocked(dirtyPhase1);
updateUserActivitySummaryLocked(now, dirtyPhase1);
if (!updateWakefulnessLocked(dirtyPhase1)) {
break;
}
}
// Phase 2: Update display power state.
boolean displayBecameReady = updateDisplayPowerStateLocked(dirtyPhase2);
// Phase 3: Update dream state (depends on display ready signal).
updateDreamLocked(dirtyPhase2, displayBecameReady);
// Phase 4: Send notifications, if needed.
finishWakefulnessChangeIfNeededLocked();
// Phase 5: Update suspend blocker.
// Because we might release the last suspend blocker here, we need to make sure
// we finished everything else first!
updateSuspendBlockerLocked();
} finally {}
}然后经过函数updateDisplayPowerStateLocked来到DisplayPowerController的requestPowerState函数
public boolean requestPowerState(DisplayPowerRequest request,
boolean waitForNegativeProximity) {
synchronized (mLock) {
boolean changed = false;
if (waitForNegativeProximity
&& !mPendingWaitForNegativeProximityLocked) {
mPendingWaitForNegativeProximityLocked = true;
changed = true;
}
if (mPendingRequestLocked == null) {
mPendingRequestLocked = new DisplayPowerRequest(request);
changed = true;
} else if (!mPendingRequestLocked.equals(request)) {
mPendingRequestLocked.copyFrom(request);
changed = true;
}
if (changed) {
mDisplayReadyLocked = false;
}
if (changed && !mPendingRequestChangedLocked) {
mPendingRequestChangedLocked = true;
sendUpdatePowerStateLocked();
}
return mDisplayReadyLocked;
}
}再次经过sendUpdatePowerStateLocked以及handler+meesage的消息，进入如下的switch结构
private final class DisplayControllerHandler extends Handler {
public DisplayControllerHandler(Looper looper) {
super(looper, null, true /*async*/);
}
@Override
public void handleMessage(Message msg) {
switch (msg.what) {
case MSG_UPDATE_POWER_STATE:
updatePowerState();
break;
case MSG_PROXIMITY_SENSOR_DEBOUNCED:
debounceProximitySensor();
break;
case MSG_SCREEN_ON_UNBLOCKED:
if (mPendingScreenOnUnblocker == msg.obj) {
unblockScreenOn();
updatePowerState();
}
break;
}
}
}2.DisplayPowerController中的block机制
block的机制的存在是为了保证在屏幕亮时所有工作都已经准备好（如屏幕完成上电以及所有窗口绘制完成），所以前后需要执行两次的updatePowerState()才会使屏幕真正的亮起来，从PMS传递过来的消息会先走到MSG_UPDATE_POWER_STATE执行第一次updatePowerState()，其核心是走到animateScreenStateChange()
private void animateScreenStateChange(int target, boolean performScreenOffTransition) {
// If there is already an animation in progress, don't interfere with it.
if (mColorFadeOnAnimator.isStarted()
|| mColorFadeOffAnimator.isStarted()) {
if (target != Display.STATE_ON) {
return;
}
// If display state changed to on, proceed and stop the color fade and turn screen on.
mPendingScreenOff = false;
}
// If we were in the process of turning off the screen but didn't quite
// finish. Then finish up now to prevent a jarring transition back
// to screen on if we skipped blocking screen on as usual.
if (mPendingScreenOff && target != Display.STATE_OFF) {
setScreenState(Display.STATE_OFF);
mPendingScreenOff = false;
mPowerState.dismissColorFadeResources();
}
if (target == Display.STATE_ON) {
// Want screen on. The contents of the screen may not yet
// be visible if the color fade has not been dismissed because
// its last frame of animation is solid black.
if (!setScreenState(Display.STATE_ON)) {
return; // screen on blocked
}
if (USE_COLOR_FADE_ON_ANIMATION && mPowerRequest.isBrightOrDim()) {
// Perform screen on animation.
if (mPowerState.getColorFadeLevel() == 1.0f) {
mPowerState.dismissColorFade();
} else if (mPowerState.prepareColorFade(mContext,
mColorFadeFadesConfig ?
ColorFade.MODE_FADE :
ColorFade.MODE_WARM_UP)) {
mColorFadeOnAnimator.start();
} else {
mColorFadeOnAnimator.end();
}
} else {
// Skip screen on animation.
mPowerState.setColorFadeLevel(1.0f);
mPowerState.dismissColorFade();
}
} else if (target == Display.STATE_DOZE) {
// Want screen dozing.
// Wait for brightness animation to complete beforehand when entering doze
// from screen on to prevent a perceptible jump because brightness may operate
// differently when the display is configured for dozing.
if (mScreenBrightnessRampAnimator.isAnimating()
&& mPowerState.getScreenState() == Display.STATE_ON) {
return;
}
// Set screen state.
if (!setScreenState(Display.STATE_DOZE)) {
return; // screen on blocked
}
// Dismiss the black surface without fanfare.
mPowerState.setColorFadeLevel(1.0f);
mPowerState.dismissColorFade();
} else if (target == Display.STATE_DOZE_SUSPEND) {
// Want screen dozing and suspended.
// Wait for brightness animation to complete beforehand unless already
// suspended because we may not be able to change it after suspension.
if (mScreenBrightnessRampAnimator.isAnimating()
&& mPowerState.getScreenState() != Display.STATE_DOZE_SUSPEND) {
return;
}
// If not already suspending, temporarily set the state to doze until the
// screen on is unblocked, then suspend.
if (mPowerState.getScreenState() != Display.STATE_DOZE_SUSPEND) {
if (!setScreenState(Display.STATE_DOZE)) {
return; // screen on blocked
}
setScreenState(Display.STATE_DOZE_SUSPEND); // already on so can't block
}
// Dismiss the black surface without fanfare.
mPowerState.setColorFadeLevel(1.0f);
mPowerState.dismissColorFade();
} else {
// Want screen off.
mPendingScreenOff = true;
if (mPowerState.getColorFadeLevel() == 0.0f) {
// Turn the screen off.
// A black surface is already hiding the contents of the screen.
setScreenState(Display.STATE_OFF);
mPendingScreenOff = false;
mPowerState.dismissColorFadeResources();
} else if (performScreenOffTransition
&& mPowerState.prepareColorFade(mContext,
mColorFadeFadesConfig ?
ColorFade.MODE_FADE : ColorFade.MODE_COOL_DOWN)
&& mPowerState.getScreenState() != Display.STATE_OFF) {
// Perform the screen off animation.
mColorFadeOffAnimator.start();
} else {
// Skip the screen off animation and add a black surface to hide the
// contents of the screen.
mColorFadeOffAnimator.end();
}
}
}mColorFadeOnAnimator与亮屏动画相关，默认是关闭的，这里不讨论，对于亮屏来说target == Display.STATE_ON为true，接着看函数setScreenState
private boolean setScreenState(int state) {
if (mPowerState.getScreenState() != state) {
final boolean wasOn = (mPowerState.getScreenState() != Display.STATE_OFF);
mPowerState.setScreenState(state);
// Tell battery stats about the transition.
try {
mBatteryStats.noteScreenState(state);
} catch (RemoteException ex) {
// same process
}
}
// Tell the window manager policy when the screen is turned off or on unless it's due
// to the proximity sensor. We temporarily block turning the screen on until the
// window manager is ready by leaving a black surface covering the screen.
// This surface is essentially the final state of the color fade animation and
// it is only removed once the window manager tells us that the activity has
// finished drawing underneath.
final boolean isOff = (state == Display.STATE_OFF);
if (isOff && mReportedScreenStateToPolicy != REPORTED_TO_POLICY_SCREEN_OFF
&& !mScreenOffBecauseOfProximity) {
mReportedScreenStateToPolicy = REPORTED_TO_POLICY_SCREEN_OFF;
unblockScreenOn();
mWindowManagerPolicy.screenTurnedOff();
} else if (!isOff && mReportedScreenStateToPolicy == REPORTED_TO_POLICY_SCREEN_OFF) {
mReportedScreenStateToPolicy = REPORTED_TO_POLICY_SCREEN_TURNING_ON;
if (mPowerState.getColorFadeLevel() == 0.0f) {
blockScreenOn();
} else {
unblockScreenOn();
}
mWindowManagerPolicy.screenTurningOn(mPendingScreenOnUnblocker);
}
// Return true if the screen isn't blocked.
return mPendingScreenOnUnblocker == null;
}2.1blockScreenOn
其中，mPowerState.setScreenState(state)与屏幕上电有关，这个放在本篇后面讲，对于第一次updatePowerState，屏幕还未上电，即mPowerState.getColorFadeLevel() == 0.0f结果为true，执行blockScreenOn()
private void blockScreenOn() {
if (mPendingScreenOnUnblocker == null) {
Trace.asyncTraceBegin(Trace.TRACE_TAG_POWER, SCREEN_ON_BLOCKED_TRACE_NAME, 0);
mPendingScreenOnUnblocker = new ScreenOnUnblocker();
mScreenOnBlockStartRealTime = SystemClock.elapsedRealtime();
Slog.i(TAG, "Blocking screen on until initial contents have been drawn.");
}
}blockscreenon的实质是new一个ScreenOnUnblocker对象，这个对象直到unblockscreen才会置为空，以此来实现block机制
2.2回调WMS
setScreenState在执行blockScreenOn之后会执行这一段话
mWindowManagerPolicy.screenTurningOn(mPendingScreenOnUnblocker);WindowManagerPolicy的实现是PhoneWindowManager，所以继续看相关代码
@Override
public void screenTurningOn(final ScreenOnListener screenOnListener) {
updateScreenOffSleepToken(false);
synchronized (mLock) {
mScreenOnEarly = true;
mScreenOnFully = false;
mKeyguardDrawComplete = false;
mWindowManagerDrawComplete = false;
mScreenOnListener = screenOnListener;
if (mKeyguardDelegate != null) {
mHandler.removeMessages(MSG_KEYGUARD_DRAWN_TIMEOUT);
mHandler.sendEmptyMessageDelayed(MSG_KEYGUARD_DRAWN_TIMEOUT, 1000);
mKeyguardDelegate.onScreenTurningOn(mKeyguardDrawnCallback);
} else {
finishKeyguardDrawn();
}
}
}其中，mKeyguardDelegate是用来向锁屏传递消息的对象，如果锁屏存在的话，会把mKeyguardDrawnCallback传递到锁屏中去，锁屏中进行相关判断，满足条件则运行callback中的方法，mKeyguardDrawnCallback中的方法最终依然是执行finishKeyguardDrawn()，所以直接看这个函数
private void finishKeyguardDrawn() {
synchronized (mLock) {
if (!mScreenOnEarly || mKeyguardDrawComplete) {
return; // We are not awake yet or we have already informed of this event.
}
mKeyguardDrawComplete = true;
if (mKeyguardDelegate != null) {
mHandler.removeMessages(MSG_KEYGUARD_DRAWN_TIMEOUT);
}
mWindowManagerDrawComplete = false;
}
// ... eventually calls finishWindowsDrawn which will finalize our screen turn on
// as well as enabling the orientation change logic/sensor.
mWindowManagerInternal.waitForAllWindowsDrawn(mWindowManagerDrawCallback,
WAITING_FOR_DRAWN_TIMEOUT);
}mKeyguardDrawComplete的存在是为了防止重复调用，不过多讨论，finishKeyguardDrawn最后是走到了WindowManagerInternal里面，WindowManagerInternal的实现类是WindowManagerService
2.3窗口绘制检查
public void waitForAllWindowsDrawn(Runnable callback, long timeout) {
boolean allWindowsDrawn = false;
synchronized (mWindowMap) {
mWaitingForDrawnCallback = callback;
final WindowList windows = getDefaultWindowListLocked();
for (int winNdx = windows.size() - 1; winNdx >= 0; --winNdx) {
final WindowState win = windows.get(winNdx);
final boolean isForceHiding = mPolicy.isForceHiding(win.mAttrs);
final boolean keyguard = mPolicy.isKeyguardHostWindow(win.mAttrs);
if (win.isVisibleLw()
&& (win.mAppToken != null || isForceHiding || keyguard)) {
win.mWinAnimator.mDrawState = DRAW_PENDING;
// Force add to mResizingWindows.
win.mLastContentInsets.set(-1, -1, -1, -1);
mWaitingForDrawn.add(win);
// No need to wait for the windows below Keyguard.
if (isForceHiding) {
break;
}
}
}
mWindowPlacerLocked.requestTraversal();
mH.removeMessages(H.WAITING_FOR_DRAWN_TIMEOUT);
if (mWaitingForDrawn.isEmpty()) {
allWindowsDrawn = true;
} else {
mH.sendEmptyMessageDelayed(H.WAITING_FOR_DRAWN_TIMEOUT, timeout);
checkDrawnWindowsLocked();
}
}
if (allWindowsDrawn) {
callback.run();
}
}这个函数会检查所有的窗口是否都绘制完全，同时启动窗口UI刷新流程，等待绘制的窗口放在mWaitingForDrawn里面，如果内容为空则表示窗口绘制完全，否则需要继续等待，并且还会发送一个延时1秒的message，防止窗口绘制超时导致屏幕无法亮起。 如果窗口都绘制完成，则会进入传过来的callback的run方法，具体看一下这个传过来的callback
final Runnable mWindowManagerDrawCallback = new Runnable() {
@Override
public void run() {
mHandler.sendEmptyMessage(MSG_WINDOW_MANAGER_DRAWN_COMPLETE);
}
};来到如下函数
private void finishWindowsDrawn() {
synchronized (mLock) {
if (!mScreenOnEarly || mWindowManagerDrawComplete) {
return; // Screen is not turned on or we did already handle this case earlier.
}
mWindowManagerDrawComplete = true;
}
finishScreenTurningOn();
}继续看
private void finishScreenTurningOn() {
synchronized (mLock) {
// We have just finished drawing screen content. Since the orientation listener
// gets only installed when all windows are drawn, we try to install it again.
updateOrientationListenerLp();
}
final ScreenOnListener listener;
final boolean enableScreen;
synchronized (mLock) {
if (mScreenOnFully || !mScreenOnEarly || !mWindowManagerDrawComplete
|| (mAwake && !mKeyguardDrawComplete)) {
return; // spurious or not ready yet
}
listener = mScreenOnListener;
mScreenOnListener = null;
mScreenOnFully = true;
// Remember the first time we draw the keyguard so we know when we're done with
// the main part of booting and can enable the screen and hide boot messages.
if (!mKeyguardDrawnOnce && mAwake) {
mKeyguardDrawnOnce = true;
enableScreen = true;
if (mBootMessageNeedsHiding) {
mBootMessageNeedsHiding = false;
hideBootMessages();
}
} else {
enableScreen = false;
}
}
if (listener != null) {
listener.onScreenOn();
}
if (enableScreen) {
try {
mWindowManager.enableScreenIfNeeded();
} catch (RemoteException unhandled) {
}
}
}注意这里的listener，这个listener是一个ScreenOnListener对象，ScreenOnListener类的实现在DisplayPowerController中，所以通过这个listener，phoneWindowManager把窗口绘制完成的消息由传回了DisplayPowerController
private final class ScreenOnUnblocker implements WindowManagerPolicy.ScreenOnListener {
@Override
public void onScreenOn() {
Message msg = mHandler.obtainMessage(MSG_SCREEN_ON_UNBLOCKED, this);
msg.setAsynchronous(true);
mHandler.sendMessage(msg);
}
}2.4unblockScreenOn
ScreenOnUnblocker中的onScreenOn方法最终会走到unblockScreenOn方法
private void unblockScreenOn() {
if (mPendingScreenOnUnblocker != null) {
mPendingScreenOnUnblocker = null;
long delay = SystemClock.elapsedRealtime() - mScreenOnBlockStartRealTime;
Slog.i(TAG, "Unblocked screen on after " + delay + " ms");
Trace.asyncTraceEnd(Trace.TRACE_TAG_POWER, SCREEN_ON_BLOCKED_TRACE_NAME, 0);
}
}并且，unblockScreenOn之后会再一次updatePowerState()，调用DisplayPowerState中的相关方法设置亮度，屏幕最终亮起来 通过unblockScreenOn方法中的log也可以得到block的总时间，一般来说，只要blockscreen前后没有过多的消息传递，可以认为block时间就是亮屏时间
3.屏幕上电
在屏幕亮起来之前需要改变屏幕的电源状态，即给屏幕上电 前面说到，在DisplayPowerController设置电源状态的方法开头有这么一段
private boolean setScreenState(int state) {
if (mPowerState.getScreenState() != state) {
final boolean wasOn = (mPowerState.getScreenState() != Display.STATE_OFF);
mPowerState.setScreenState(state);
...mPowerState是一个DisplayPowerState对象，继续看具体的实现
public void setScreenState(int state) {
if (mScreenState != state) {
mScreenState = state;
mScreenReady = false;
scheduleScreenUpdate();
}
}mScreenState和mScreenReady会用于状态检查，然后通过scheduleScreenUpdate向底层发出给屏幕上电的命令，具体的流程比较长而且复杂，不一一说明，大致的调用流程是 DisplayPowerState -DisplayManagerService -LocalDisplayAdapter -SurfaceControl -HWComposer 屏幕的上电时间与硬件的时序相关，并且是影响亮屏总时间的一个非常重要的因素， 查看屏幕的上电时间可以通过搜索trace文件中的setPowerModeInternal查看或者搜索surfaceControl的log，setPowerMode
原创声明：本文系作者授权腾讯云开发者社区发表，未经许可，不得转载。
如有侵权，请联系 cloudcommunity@tencent.com 删除。
原创声明：本文系作者授权腾讯云开发者社区发表，未经许可，不得转载。
如有侵权，请联系 cloudcommunity@tencent.com 删除。
评论
登录后参与评论
暂无评论
推荐阅读
相关推荐
【less-1】基于SQLI的SQL字符型报错注入
更多 >
腾讯云开发者
