kubeadm系列-02-kubelet的配置和启动

runzhliu

发布于 2022-07-05 07:52:05

1.7K0

发布于 2022-07-05 07:52:05

文章被收录于专栏：容器计算

文章目录
overview
默认的配置
drop in配置
启动
其他

overview

不管是在 control plane 节点还是在普通的 worker 节点，kubelet 是必须要启动的进程，而 kubelet 的安装方式可以用 rpm 包也可以用二进制

关于 kube init 里关于 kubelet 启动的日志，复习一下

# 开始启动kubelet
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet

默认的配置

对于默认配置，我们可以不用每个参数都非常了解，可以有需要的时候再去查相关的文档和代码

# kubeadm config print init-defaults --component-configs KubeletConfiguration
# 节选了kind: KubeletConfiguration的部分
---
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    cacheTTL: 0s
    enabled: true
  x509:
    clientCAFile: /etc/kubernetes/pki/ca.crt
authorization:
  mode: Webhook
  webhook:
    cacheAuthorizedTTL: 0s
    cacheUnauthorizedTTL: 0s
cgroupDriver: cgroupfs
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local
cpuManagerReconcilePeriod: 0s
evictionPressureTransitionPeriod: 0s
fileCheckFrequency: 0s
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 0s
imageMinimumGCAge: 0s
kind: KubeletConfiguration
logging: {}
nodeStatusReportFrequency: 0s
nodeStatusUpdateFrequency: 0s
rotateCertificates: true
runtimeRequestTimeout: 0s
shutdownGracePeriod: 0s
shutdownGracePeriodCriticalPods: 0s
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 0s
syncFrequency: 0s
volumeStatsAggPeriod: 0s

drop in配置

kubelet 有一些特殊的配置文件需要注意一下，不明白的可以查看官方文档

在不用那些包管理器的情况下，徒手装的文档可以参考这里

启动

kubelet 真正被启动的逻辑在下面的代码里，首先会先尝试停止进程（防止有多个进程启动了），本质上就是通过 systemctl status kubelet 先检查服务的状态，如果没有 enable 就会提醒，如果 enable 了就会通过 systemctl stop kubelet 来停止服务，然后会吧 ClusterConfiguration 和 NodeRegistration 的参数（并不是所有，主要是启动进程启动的参数args之类的写到KUBELET_KUBEADM_ARGS）合并，并且会写到默认的路径 /var/lib/kubelet/kubeadm-flags.env，然后再把 ClusterConfiguration （只针对kubelet.config.k8s.io）写到磁盘 /var/lib/kubelet/config.yaml，最后就是通过 systemctl start kubelet 来启动进程了

// runKubeletStart executes kubelet start logic.
func runKubeletStart(c workflow.RunData) error {
	data, ok := c.(InitData)
	if !ok {
		return errors.New("kubelet-start phase invoked with an invalid data struct")
	}

	// First off, configure the kubelet. In this short timeframe, kubeadm is trying to stop/restart the kubelet
	// Try to stop the kubelet service so no race conditions occur when configuring it
	if !data.DryRun() {
		klog.V(1).Infoln("Stopping the kubelet")
		kubeletphase.TryStopKubelet()
	}

	// Write env file with flags for the kubelet to use. We do not need to write the --register-with-taints for the control-plane,
	// as we handle that ourselves in the mark-control-plane phase
	// TODO: Maybe we want to do that some time in the future, in order to remove some logic from the mark-control-plane phase?
	if err := kubeletphase.WriteKubeletDynamicEnvFile(&data.Cfg().ClusterConfiguration, &data.Cfg().NodeRegistration, false, data.KubeletDir()); err != nil {
		return errors.Wrap(err, "error writing a dynamic environment file for the kubelet")
	}

	// Write the kubelet configuration file to disk.
	if err := kubeletphase.WriteConfigToDisk(&data.Cfg().ClusterConfiguration, data.KubeletDir()); err != nil {
		return errors.Wrap(err, "error writing kubelet configuration to disk")
	}

	// Try to start the kubelet service in case it's inactive
	if !data.DryRun() {
		fmt.Println("[kubelet-start] Starting the kubelet")
		kubeletphase.TryStartKubelet()
	}

	return nil
}

来看下

# cat /var/lib/kubelet/kubeadm-flags.env
KUBELET_KUBEADM_ARGS="--network-plugin=cni --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.4.1"
# cat /var/lib/kubelet/config.yaml
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    cacheTTL: 0s
    enabled: true
  x509:
    clientCAFile: /etc/kubernetes/pki/ca.crt
authorization:
  mode: Webhook
  webhook:
    cacheAuthorizedTTL: 0s
    cacheUnauthorizedTTL: 0s
cgroupDriver: cgroupfs
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local
cpuManagerReconcilePeriod: 0s
evictionPressureTransitionPeriod: 0s
fileCheckFrequency: 0s
healthzBindAddress: 127.0.0.1
healthzPort: 10248
httpCheckFrequency: 0s
imageMinimumGCAge: 0s
kind: KubeletConfiguration
logging: {}
nodeStatusReportFrequency: 0s
nodeStatusUpdateFrequency: 0s
rotateCertificates: true
runtimeRequestTimeout: 0s
shutdownGracePeriod: 0s
shutdownGracePeriodCriticalPods: 0s
staticPodPath: /etc/kubernetes/manifests
streamingConnectionIdleTimeout: 0s
syncFrequency: 0s
volumeStatsAggPeriod: 0s

其他

下面是在 control plane 上完整启动了 kubelet 之后通过 ps -ef|cat 获得的进程以及参数

# kubeadm init --upload-certs --image-repository registry.aliyuncs.com/google_containers --kubernetes-version 1.21.7 --pod-network-cidr=10.244.0.0/16
/usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf --config=/var/lib/kubelet/config.yaml --network-plugin=cni --pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.4.1

本文参与腾讯云自媒体同步曝光计划，分享自作者个人站点/博客。

原始发表：2022-07-05，如有侵权请联系 cloudcommunity@tencent.com 删除

config

init

var

本文分享自作者个人站点/博客前往查看

如有侵权，请联系 cloudcommunity@tencent.com 删除。

本文参与腾讯云自媒体同步曝光计划，欢迎热爱写作的你一起参与！

config

init

var

登录后参与评论

0 条评论

热度