OpenHarmony南向统一编译的docker镜像来了

原创

小帅聊鸿蒙

发布于 2024-07-29 17:40:43

1780

由于我自己的南向设备开发平台的需求，我将当前几个不同的 docker 镜像版本进行了整合，经过一段时间的攻关和验证，目前整合已完成，新版本的 Dockerfile 如下，这个不是公共需求，所以没有提交主干，存这里备个案，需要的伙伴自行使用。使用方法如下：

1。在 Dockerfile 所在目录执行如下命令生成镜像

docker build -t oh_compile:v1 .

2。使用 docker images 查看 oh_compile:v1 是否成功构建

Docker镜像简介

本文为OpenHarmony的Docker编译环境使用指导。

OpenHarmony的Docker镜像托管在 HUAWEI Cloud SWR 上，开发者可以通过该镜像在很大程度上简化编译前的环境配置。目前容器化构建选项支持情况如下：

Docker镜像仓库	标签	说明
`swr.cn-south-1.myhuaweicloud.com/openharmony-docker/openharmony-docker`	`1.0.0`	已经预安装OpenHarmony版本的编译环境。

使用方式及步骤

开发者在下载好源码后，可以通过以下步骤来使用我们提供的Docker环境。

获取Docker镜像

     docker pull swr.cn-south-1.myhuaweicloud.com/openharmony-docker/openharmony-docker:1.0.0

进入OpenHarmony代码根目录执行如下命令，从而进入Docker构建环境

     docker run -it -v $(pwd):/home/openharmony swr.cn-south-1.myhuaweicloud.com/openharmony-docker/openharmony-docker:1.0.0

通过如下命令启动不同平台的编译 hb set #在显示的页面中通过键盘上下键选择需要编译的平台，通过回车确定选择。 hb build -f #执行编译。本次整合后的完整 Dockerfile 如下，我额外调整了一下 WORKDIR 为 /root, 你们可以恢复成/home/openharmony

FROM ubuntu:20.04

WORKDIR /root


ARG DEBIAN_FRONTEND=noninteractive

RUN TZ=Asia/Shanghai && sed -i "s@http://.*archive.ubuntu.com@http://repo.huaweicloud.com@g" /etc/apt/sources.list  \
    && sed -i "s@http://.*security.ubuntu.com@http://repo.huaweicloud.com@g" /etc/apt/sources.list  \
    && apt-get update -y  \
    && apt-get install -y locales default-jre default-jdk libelf-dev bc rsync mtools dosfstools \
    wget curl ssh vim ccache libxi-dev libxrandr-dev libxcursor-dev libxinerama-dev libpixman-1-dev \
    qemu gcc-arm-none-eabi xsltproc lib32z1-dev libgl1-mesa-dev libx11-dev libxml2-dev kmod \
    libssl-dev openssl scons python3.8 mtd-utils binutils libglib2.0-dev genext2fs apt-utils gnupg \
    zlib1g-dev m4 u-boot-tools build-essential unzip make libc6-dev-i386 x11proto-core-dev g++ \
    libncurses5 libtinfo5 git-lfs gcc cpio perl ruby flex bison python3-pip zip git gperf \
    doxygen liblz4-tool  python3.8-distutils libffi-dev zlib* e2fsprogs device-tree-compiler \
    git-core libdwarf-dev lib32ncurses5-dev gnutls-bin gcc-arm-linux-gnueabi  \
    binutils-dev grsync xxd jfsutils reiserfsprogs xfsprogs squashfs-tools pcmciautils \
    quota ppp libtinfo-dev libncurses5-dev libncursesw5 libstdc++6 \
    && wget -P /home/tools https://repo.huaweicloud.com/harmonyos/compiler/gcc-arm-none-eabi/10.3/linux/gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2 \
    && wget -P /home/tools https://repo.huaweicloud.com/harmonyos/compiler/hc-gen/0.65/linux/hc-gen-0.65-linux.tar \
    && wget -P /home/tools https://repo.huaweicloud.com/harmonyos/compiler/gcc_riscv32/7.3.0/linux/gcc_riscv32-linux-7.3.0.tar.gz \
    && wget -P /home/tools https://mirrors.huaweicloud.com/nodejs/v14.19.1/node-v14.19.1-linux-x64.tar.xz \
    && wget -P /home/tools https://repo.huaweicloud.com/harmonyos/compiler/ninja/1.10.1/linux/ninja-linux-x86-1.10.1.tar.gz  \
    && wget -P /home/tools https://repo.huaweicloud.com/harmonyos/compiler/gn/2021/linux/gn-linux-x86-2021.tar.gz  \
    && wget -P /home/tools https://repo.huaweicloud.com/harmonyos/compiler/clang/12.0.1-36cd05/linux/clang_linux-x86_64-36cd05-20221030.tar.bz2  \
    && wget -P /home/tools https://hm-verify.obs.cn-north-4.myhuaweicloud.com/qemu-5.2.0.tar.xz \
    && locale-gen "en_US.UTF-8"  \
    && rm -rf /bin/sh /usr/bin/python /usr/bin/python3  \
    && mkdir -p /home/tools/gn  \
    && mkdir -p /home/tools/ninja  \
    && ln -s /bin/bash /bin/sh  \
    && ln -s /usr/bin/python3.8 /usr/bin/python3  \
    && ln -s /usr/bin/python3.8 /usr/bin/python \
    && pip3 install --trusted-host https://repo.huaweicloud.com \
    -i https://repo.huaweicloud.com/repository/pypi/simple \
    pycryptodome ecdsa redis kconfiglib setuptools requests ohos-build \
    pymongo  pyyaml prompt_toolkit==1.0.14 json2html yagmail python-jenkins  \
    && tar -xvf /home/tools/hc-gen-0.65-linux.tar -C /home/tools \
    && tar -xvf /home/tools/gcc_riscv32-linux-7.3.0.tar.gz -C /home/tools \
    && tar -xvf /home/tools/clang_linux-x86_64-36cd05-20221030.tar.bz2 -C /home/tools  \
    && tar -xvf /home/tools/ninja-linux-x86-1.10.1.tar.gz -C /home/tools/ninja  \
    && tar -xvf /home/tools/gn-linux-x86-2021.tar.gz -C /home/tools/gn  \
    && tar -xJf /home/tools/node-v14.19.1-linux-x64.tar.xz -C /home/tools  \
    && tar -jxvf /home/tools/gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2 -C /home/tools \
    && tar -xJf /home/tools/qemu-5.2.0.tar.xz -C /home/tools  \
    && cp /home/tools/node-v14.19.1-linux-x64/bin/node /usr/local/bin  \
    && ln -s /home/tools/node-v14.19.1-linux-x64/lib/node_modules/npm/bin/npm-cli.js /usr/local/bin/npm  \
    && ln -s /home/tools/node-v14.19.1-linux-x64/lib/node_modules/npm/bin/npx-cli.js /usr/local/bin/npx  \
    && sed -i '$aexport PATH=/home/tools/hc-gen:$PATH' /root/.bashrc  \
    && sed -i '$aexport PATH=/home/tools/gcc_riscv32/bin:$PATH' /root/.bashrc \
    && sed -i '$aexport PATH=/home/tools/gcc-arm-none-eabi-10.3-2021.10/bin:$PATH' /root/.bashrc \
    && sed -i '$aexport PATH=/home/tools/clang_linux-x86_64-36cd05-20221030/bin:$PATH' /root/.bashrc \
    && sed -i '$aexport PATH=/home/tools/ninja:$PATH' /root/.bashrc  \
    && sed -i '$aexport PATH=/home/tools/gn:$PATH' /root/.bashrc  \
    && sed -i '$aexport PATH=/home/tools/node-v14.19.1-linux-x64/bin:$PATH' /root/.bashrc  \
    && sed -i '$aexport PATH=/root/.local/bin:$PATH' /root/.bashrc \
    && export PATH=/home/tools/hc-gen:$PATH  \
    && export PATH=/home/tools/gcc_riscv32/bin:$PATH \
    && export PATH=/home/tools/gcc-arm-none-eabi-10.3-2021.10/bin:$PATH \
    && export PATH=/home/tools/clang_linux-x86_64-36cd05-20221030/bin:$PATH  \
    && export PATH=/home/tools/ninja:$PATH  \
    && export PATH=/home/tools/gn:$PATH  \
    && export PATH=/home/tools/node-v14.19.1-linux-x64/bin:$PATH  \
    && export PATH=/root/.local/bin:$PATH  \
    && cd /home/tools/qemu-5.2.0  \
    && mkdir build  && cd build  \
    && ../configure --target-list=arm-softmmu  \
    && make -j  \
    && make install \
    && cd /root     \
    && rm -rf /home/tools/*.xz  \
    && rm -rf /home/tools/*.gz  \
    && rm -rf /home/tools/*.tar  \
    && rm -rf /home/tools/*.bz2 \
    && rm -rf /home/tools/qemu-5.2.0 \
    && npm install -g @ohos/hpm-cli --registry https://mirrors.huaweicloud.com/repository/npm/ \
    && pip3 install ohos-build

ENV LANG=en_US.UTF-8 LANGUAGE=en_US.UTF-8 LC_ALL=en_US.UTF-8 TZ=Asia/Shanghai


CMD ["/bin/bash"]