信创：鲲鹏(arm64)+麒麟(kylin v10)离线部署k8s和kubesphere(含离线部署新方式)

编码如写诗

发布于 2024-08-30 11:32:29

5070

发布于 2024-08-30 11:32:29

文章被收录于专栏：编码如写诗

先说新方式结论：不论什么CPU架构和操作系统，只要在线能安装的，统统都可以离线安装的。

适配arm麒麟过程中和文章格式有参考运维有术公众号相关文章运维有术，公众号：运维有术ARM 版 Kylin V10 部署 KubeSphere v3.4.0 不完全指南

本文将详细介绍，如何基于鲲鹏CPU(arm64)和操作系统 Kylin V10 SP2/SP3，利用 KubeKey 制作 KubeSphere 和 Kubernetes 离线安装包，并实战部署 KubeSphere 3.3.1 和 Kubernetes 1.22.12 集群。

服务器配置

主机名	IP	CPU	OS	用途
master-1	192.168.10.2	Kunpeng-920	Kylin V10 SP2	离线环境 KubeSphere/k8s-master
master-2	192.168.10.3	Kunpeng-920	Kylin V10 SP2	离线环境 KubeSphere/k8s-master
master-3	192.168.10.4	Kunpeng-920	Kylin V10 SP2	离线环境 KubeSphere/k8s-master
deploy	192.168.200.7	Kunpeng-920	Kylin V10 SP3	联网主机用于制作离线包

实战环境涉及软件版本信息

服务器芯片：Kunpeng-920
操作系统：麒麟V10 SP2/SP3 aarch64
Docker: 24.0.7
Harbor: v2.7.1
KubeSphere：v3.3.1
Kubernetes：v1.22.12
KubeKey: v2.3.1

本文介绍

本文介绍了如何在 麒麟 V10 aarch64 架构服务器上制品和离线部署 KubeSphere 和 Kubernetes 集群。我们将使用 KubeSphere 开发的 KubeKey 工具实现自动化部署，在三台服务器上实现高可用模式最小化部署 Kubernetes 集群和 KubeSphere。

KubeSphere 和 Kubernetes 在 ARM 架构和 X86 架构的服务器上部署，最大的区别在于所有服务使用的容器镜像架构类型的不同，KubeSphere 开源版对于 ARM 架构的默认支持可以实现 KubeSphere-Core 功能，即可以实现最小化的 KubeSphere 和完整的 Kubernetes 集群的部署。当启用了 KubeSphere 可插拔组件时，会遇到个别组件部署失败的情况，需要我们手工替换官方或是第三方提供的 ARM 版镜像或是根据官方源码手工构建 ARM 版镜像。如果需要实现开箱即用及更多的技术支持，则需要购买企业版的 KubeSphere。

1.1 确认操作系统配置

在执行下文的任务之前，先确认操作系统相关配置。

操作系统类型

[root@localhost ~]# cat /etc/os-release
NAME="Kylin Linux Advanced Server"
VERSION="V10 (Halberd)"
ID="kylin"
VERSION_ID="V10"
PRETTY_NAME="Kylin Linux Advanced Server V10 (Halberd)"
ANSI_COLOR="0;31

操作系统内核

[root@node1 ~]# uname -r
Linux node1 4.19.90-52.22.v2207.ky10.aarch64

服务器 CPU 信息

[root@node1 ~]# lscpu
Architecture:                    aarch64
CPU op-mode(s):                  64-bit
Byte Order:                      Little Endian
CPU(s):                          32
On-line CPU(s) list:             0-31
Thread(s) per core:              1
Core(s) per socket:              1
Socket(s):                       32
NUMA node(s):                    2
Vendor ID:                       HiSilicon
Model:                           0
Model name:                      Kunpeng-920
Stepping:                        0x1
BogoMIPS:                        200.00
NUMA node0 CPU(s):               0-15
NUMA node1 CPU(s):               16-31
Vulnerability Itlb multihit:     Not affected
Vulnerability L1tf:              Not affected
Vulnerability Mds:               Not affected
Vulnerability Meltdown:          Not affected
Vulnerability Spec store bypass: Not affected
Vulnerability Spectre v1:        Mitigation; __user pointer sanitization
Vulnerability Spectre v2:        Not affected
Vulnerability Srbds:             Not affected
Vulnerability Tsx async abort:   Not affected
Flags:                           fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm jscvt fcma dcpop asimddp asimdfhm

2. 安装k8s依赖服务

这里使用能联网的 deploy 节点，用来制作离线部署资源包。由于harbor官方不支持arm，先使用在线安装kubesphere，后续根据kubekey生成的文件作为伪制品。故在192.168.200.7服务器以单节点形式部署ks。

以下为多阶段部署，目的是方便制作离线安装包

2.1 部署docker和docker-compose

具体可参考以下文章第一部分天行1st，公众号：编码如写诗鲲鹏+欧拉部署KubeSphere3.4

这里采用制作好的安装包形式，直接安装,解压后执行其中的install.sh

https://pan.baidu.com/s/1NUYFg3ayp1JHhNdUSY25wQ?pwd=9tek

2.2 部署harbor

上传安装包后解压后执行其中的install.sh

https://pan.baidu.com/s/1fL69nDOG5j92bEk84UQk7g?pwd=uian

2.3 下载麒麟系统k8s依赖包

mkdir -p /root/kubesphere/k8s-init
# 该命令将下载相关依赖到/root/kubesphere/k8s-init目录
yum -y install openssl socat conntrack ipset ebtables chrony ipvsadm --downloadonly --downloaddir /root/kubesphere/k8s-init
# 编写安装脚本
cat install.sh
#!/bin/bash
# 

rpm -ivh *.rpm --force --nodeps

# 打成压缩包，方便离线部署使用
tar -czvf k8s-init-Kylin_V10-arm.tar.gz ./k8s-init/*

2.4 下载ks相关镜像

下载kubesphere3.3.1所需要的arm镜像

#!/bin/bash
# 
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-console:v3.3.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-controller-manager:v3.3.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-installer:v3.3.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/ks-apiserver:v3.3.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/openpitrix-jobs:v3.3.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/alpine:3.14
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-apiserver:v1.22.12
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-scheduler:v1.22.12
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-proxy:v1.22.12
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controller-manager:v1.22.12
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/provisioner-localpv:3.3.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/linux-utils:3.3.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controllers:v3.23.2
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/cni:v3.23.2
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/pod2daemon-flexvol:v3.23.2
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/node:v3.23.2
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-state-metrics:v2.5.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/fluent-bit:v1.8.11
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-config-reloader:v0.55.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-operator:v0.55.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/thanos:v0.25.2
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus:v2.34.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/fluentbit-operator:v0.13.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/node-exporter:v1.3.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kubectl:v1.22.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager:v1.4.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/notification-tenant-sidecar:v3.2.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager-operator:v1.4.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/alertmanager:v0.23.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.11.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/docker:19.03
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/pause:3.5
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/configmap-reload:v0.5.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/snapshot-controller:v4.0.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.8.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/coredns:1.8.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/log-sidecar-injector:1.1
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/k8s-dns-node-cache:1.15.12
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/defaultbackend-amd64:1.4
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/redis:5.0.14-alpine
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/haproxy:2.3
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/opensearch:2.6.0
docker pull registry.cn-beijing.aliyuncs.com/kubesphereio/busybox:latest
docker pull kubesphere/fluent-bit:v2.0.6

这里使用ks阿里云镜像，其中有些镜像会下载失败,具体可查看运维有术文章。对于下载失败的镜像，可通过本地电脑，直接去hub.docker.com下载。例如：

docker pull kubesphere/fluent-bit:v2.0.6 --platform arm64
#官方ks-console:v3.3.1(arm版)在麒麟中跑不起来，据运维有术介绍，需要使用node14基础镜像。当在鲲鹏服务器准备自己构建时报错淘宝源https过期，使用https://registry.npmmirror.com仍然报错，于是放弃使用该3.3.0镜像，重命名为3.3.1
docker pull zl862520682/ks-console:v3.3.0
docker tag zl862520682/ks-console:v3.3.0 dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1
## mc和minio也需要重新拉取打tag
docker pull minio/minio:RELEASE.2020-11-25T22-36-25Z-arm64
docker tag  minio/minio:RELEASE.2020-11-25T22-36-25Z-arm64 dockerhub.kubekey.local/kubesphereio/minio:RELEASE

2.5 重命名镜像

重新给镜像打tag，标记为私有仓库镜像

878  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controllers:v3.27.3  dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.27.3
879  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/cni:v3.27.3  dockerhub.kubekey.local/kubesphereio/cni:v3.27.3
880  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/pod2daemon-flexvol:v3.27.3  dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.27.3
881  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/node:v3.27.3  dockerhub.kubekey.local/kubesphereio/node:v3.27.3
882  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-console:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1
883  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/alpine:3.14  dockerhub.kubekey.local/kubesphereio/alpine:3.14
884  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/k8s-dns-node-cache:1.22.20  dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.22.20
885  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-controller-manager:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-controller-manager:v3.3.1
886  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-installer:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-installer:v3.3.1
887  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/ks-apiserver:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-apiserver:v3.3.1
888  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/openpitrix-jobs:v3.3.1  dockerhub.kubekey.local/kubesphereio/openpitrix-jobs:v3.3.1
889  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-apiserver:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-apiserver:v1.22.12
890  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-proxy:v1.22.12  dockerhub.kubekey.local/kubesphereio/
891  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controller-manager:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-controller-manager:v1.22.12
892  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-scheduler:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-scheduler:v1.22.12
893  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/provisioner-localpv:3.3.0  dockerhub.kubekey.local/kubesphereio/provisioner-localpv:3.3.0
894  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/linux-utils:3.3.0  dockerhub.kubekey.local/kubesphereio/linux-utils:3.3.0
895  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-state-metrics:v2.5.0  dockerhub.kubekey.local/kubesphereio/kube-state-metrics:v2.5.0
896  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/fluent-bit:v1.8.11  dockerhub.kubekey.local/kubesphereio/fluent-bit:v1.8.11
897  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-config-reloader:v0.55.1  dockerhub.kubekey.local/kubesphereio/prometheus-config-reloader:v0.55.1
898  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus-operator:v0.55.1  dockerhub.kubekey.local/kubesphereio/prometheus-operator:v0.55.1
899  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/thanos:v0.25.2  dockerhub.kubekey.local/kubesphereio/thanos:v0.25.2
900  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/prometheus:v2.34.0  dockerhub.kubekey.local/kubesphereio/prometheus:v2.34.0
901  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/fluentbit-operator:v0.13.0  dockerhub.kubekey.local/kubesphereio/fluentbit-operator:v0.13.0
903  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/node-exporter:v1.3.1  dockerhub.kubekey.local/kubesphereio/node-exporter:v1.3.1
904  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kubectl:v1.22.0  dockerhub.kubekey.local/kubesphereio/kubectl:v1.22.0
905  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager:v1.4.0  dockerhub.kubekey.local/kubesphereio/notification-manager:v1.4.0
906  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/notification-tenant-sidecar:v3.2.0  dockerhub.kubekey.local/kubesphereio/notification-tenant-sidecar:v3.2.0
907  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/notification-manager-operator:v1.4.0  dockerhub.kubekey.local/kubesphereio/notification-manager-operator:v1.4.0
908  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/alertmanager:v0.23.0  dockerhub.kubekey.local/kubesphereio/alertmanager:v0.23.0
909  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.11.0  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.11.0
910  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/docker:19.03  dockerhub.kubekey.local/kubesphereio/docker:19.03
911  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/metrics-server:v0.4.2  dockerhub.kubekey.local/kubesphereio/metrics-server:v0.4.2
912  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/pause:3.5  dockerhub.kubekey.local/kubesphereio/pause:3.5
913  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/configmap-reload:v0.5.0  dockerhub.kubekey.local/kubesphereio/configmap-reload:v0.5.0
914  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/snapshot-controller:v4.0.0  dockerhub.kubekey.local/kubesphereio/snapshot-controller:v4.0.0
915  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z  dockerhub.kubekey.local/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z
916  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z  dockerhub.kubekey.local/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z
917  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-rbac-proxy:v0.8.0  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.8.0
918  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/coredns:1.8.0  dockerhub.kubekey.local/kubesphereio/coredns:1.8.0
919  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/log-sidecar-injector:1.1  dockerhub.kubekey.local/kubesphereio/log-sidecar-injector:1.1
921  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/defaultbackend-amd64:1.4  dockerhub.kubekey.local/kubesphereio/defaultbackend-amd64:1.4
922  docker tag  registry.cn-beijing.aliyuncs.com/kubesphereio/kube-proxy:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-proxy:v1.22.12
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/k8s-dns-node-cache:1.22.20 dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.15.12
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/kube-controllers:v3.23.2    dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.23.2
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/cni:v3.23.2   dockerhub.kubekey.local/kubesphereio/cni:v3.23.2
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/pod2daemon-flexvol:v3.23.2   dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.23.2
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/node:v3.23.2  dockerhub.kubekey.local/kubesphereio/node:v3.23.2
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/opensearch:2.6.0 dockerhub.kubekey.local/kubesphereio/opensearch:2.6.0
docker tag registry.cn-beijing.aliyuncs.com/kubesphereio/busybox:latest dockerhub.kubekey.local/kubesphereio/busybox:latest
docker tag kubesphere/fluent-bit:v2.0.6 dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6 # 也可重命名为v1.8.11，可省下后续修改fluent的yaml，这里采用后修改方式

2.6 推送至harbor私有仓库


#!/bin/bash
# 

docker load < ks3.3.1-images.tar.gz

docker login -u admin -p Harbor12345 dockerhub.kubekey.local

docker push dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1
docker push dockerhub.kubekey.local/kubesphereio/ks-controller-manager:v3.3.1
docker push dockerhub.kubekey.local/kubesphereio/ks-installer:v3.3.1
docker push dockerhub.kubekey.local/kubesphereio/ks-apiserver:v3.3.1
docker push dockerhub.kubekey.local/kubesphereio/openpitrix-jobs:v3.3.1
docker push dockerhub.kubekey.local/kubesphereio/alpine:3.14
docker push dockerhub.kubekey.local/kubesphereio/kube-apiserver:v1.22.12
docker push dockerhub.kubekey.local/kubesphereio/kube-scheduler:v1.22.12
docker push dockerhub.kubekey.local/kubesphereio/kube-proxy:v1.22.12
docker push dockerhub.kubekey.local/kubesphereio/kube-controller-manager:v1.22.12
docker push dockerhub.kubekey.local/kubesphereio/provisioner-localpv:3.3.0
docker push dockerhub.kubekey.local/kubesphereio/linux-utils:3.3.0
docker push dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.23.2
docker push dockerhub.kubekey.local/kubesphereio/cni:v3.23.2
docker push dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.23.2
docker push dockerhub.kubekey.local/kubesphereio/node:v3.23.2
docker push dockerhub.kubekey.local/kubesphereio/kube-state-metrics:v2.5.0
docker push dockerhub.kubekey.local/kubesphereio/fluent-bit:v1.8.11
docker push dockerhub.kubekey.local/kubesphereio/prometheus-config-reloader:v0.55.1
docker push dockerhub.kubekey.local/kubesphereio/prometheus-operator:v0.55.1
docker push dockerhub.kubekey.local/kubesphereio/thanos:v0.25.2
docker push dockerhub.kubekey.local/kubesphereio/prometheus:v2.34.0
docker push dockerhub.kubekey.local/kubesphereio/fluentbit-operator:v0.13.0
docker push dockerhub.kubekey.local/kubesphereio/node-exporter:v1.3.1
docker push dockerhub.kubekey.local/kubesphereio/kubectl:v1.22.0
docker push dockerhub.kubekey.local/kubesphereio/notification-manager:v1.4.0
docker push dockerhub.kubekey.local/kubesphereio/notification-tenant-sidecar:v3.2.0
docker push dockerhub.kubekey.local/kubesphereio/notification-manager-operator:v1.4.0
docker push dockerhub.kubekey.local/kubesphereio/alertmanager:v0.23.0
docker push dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.11.0
docker push dockerhub.kubekey.local/kubesphereio/docker:19.03
docker push dockerhub.kubekey.local/kubesphereio/pause:3.5
docker push dockerhub.kubekey.local/kubesphereio/configmap-reload:v0.5.0
docker push dockerhub.kubekey.local/kubesphereio/snapshot-controller:v4.0.0
docker push dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.8.0
docker push dockerhub.kubekey.local/kubesphereio/coredns:1.8.0
docker push dockerhub.kubekey.local/kubesphereio/log-sidecar-injector:1.1
docker push dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.15.12
docker push dockerhub.kubekey.local/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z
docker push dockerhub.kubekey.local/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z
docker push dockerhub.kubekey.local/kubesphereio/defaultbackend-amd64:1.4
docker push dockerhub.kubekey.local/kubesphereio/redis:5.0.14-alpine
docker push dockerhub.kubekey.local/kubesphereio/haproxy:2.3
docker push dockerhub.kubekey.local/kubesphereio/opensearch:2.6.0
docker push dockerhub.kubekey.local/kubesphereio/busybox:latest
docker push dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6

3. 使用kk部署kubesphere

3.1 移除麒麟系统自带的podman

podman是麒麟系统自带的容器引擎，为避免后续与docker冲突，直接卸载。否则后续coredns/nodelocaldns也会受影响无法启动以及各种docker权限问题。

yum remove podman

3.2 下载kubekey

下载 kubekey-v2.3.1-linux-arm64.tar.gz。具体 KubeKey 版本号可以在 KubeKey 发行页面([1]) 查看。

方式一

cd ~
mkdir kubesphere
cd kubesphere/

# 选择中文区下载(访问 GitHub 受限时使用)
export KKZONE=cn

# 执行下载命令，获取最新版的 kk（受限于网络，有时需要执行多次）
curl -sfL https://get-kk.kubesphere.io/v2.3.1/kubekey-v2.3.1-linux-arm64.tar.gz | tar xzf -

方式二

使用本地电脑，直接去github下载 Releases · kubesphere/kubekey

上传至服务器/root/kubesphere目录解压

tar zxf kubekey-v2.3.1-linux-arm64.tar.gz

3.3 生成集群创建配置文件

创建集群配置文件，本示例中，选择 KubeSphere v3.3.1 和 Kubernetes v1.22.12。

./kk create config -f kubesphere-v331-v12212.yaml --with-kubernetes v1.22.12 --with-kubesphere v3.3.1

命令执行成功后，在当前目录会生成文件名为 kubesphere-v331-v12212.yaml 的配置文件。

注意： 生成的默认配置文件内容较多，这里就不做过多展示了，更多详细的配置参数请参考官方配置示例。

本文示例采用 3 个节点同时作为 control-plane、etcd 节点和 worker 节点。

编辑配置文件 kubesphere-v331-v12212.yaml，主要修改 kind: Cluster 和 kind: ClusterConfiguration 两小节的相关配置

修改 kind: Cluster 小节中 hosts 和 roleGroups 等信息，修改说明如下。

hosts：指定节点的 IP、ssh 用户、ssh 密码、ssh 端口。特别注意： 一定要手工指定 arch: arm64，否则部署的时候会安装 X86 架构的软件包。
roleGroups：指定 3 个 etcd、control-plane 节点，复用相同的机器作为 3 个 worker 节点。
internalLoadbalancer：启用内置的 HAProxy 负载均衡器。
domain：自定义了一个 opsman.top
containerManager：使用了 containerd
storage.openebs.basePath：新增配置，指定默认存储路径为 /data/openebs/local

修改后的示例如下：


apiVersion: kubekey.kubesphere.io/v1alpha2
kind: Cluster
metadata:
  name: sample
spec:
  hosts:
  - {name: node1, address: 192.168.200.7, internalAddress: 192.168.200.7, user: root, password: "123456", arch: arm64}
  roleGroups:
    etcd:
    - node1
    control-plane: 
    - node1
    worker:
    - node1
    registry:
    - node1
  controlPlaneEndpoint:
    ## Internal loadbalancer for apiservers 
    # internalLoadbalancer: haproxy

    domain: lb.kubesphere.local
    address: ""
    port: 6443
  kubernetes:
    version: v1.22.12
    clusterName: cluster.local
    autoRenewCerts: true
    containerManager: docker
  etcd:
    type: kubekey
  network:
    plugin: calico
    kubePodsCIDR: 10.233.64.0/18
    kubeServiceCIDR: 10.233.0.0/18
    ## multus support. https://github.com/k8snetworkplumbingwg/multus-cni
    multusCNI:
      enabled: false
  registry:
    type: harbor
    auths:
      "dockerhub.kubekey.local":
        username: admin
        password: Harbor12345
    privateRegistry: "dockerhub.kubekey.local"
    namespaceOverride: "kubesphereio"
    registryMirrors: []
    insecureRegistries: []
  addons: []



---
apiVersion: installer.kubesphere.io/v1alpha1
kind: ClusterConfiguration
metadata:
  name: ks-installer
  namespace: kubesphere-system
  labels:
    version: v3.3.1
spec:
  persistence:
    storageClass: ""
  authentication:
    jwtSecret: ""
  zone: ""
  local_registry: ""
  namespace_override: ""
  # dev_tag: ""
  etcd:
    monitoring: true
    endpointIps: localhost
    port: 2379
    tlsEnable: true
  common:
    core:
      console:
        enableMultiLogin: true
        port: 30880
        type: NodePort
    # apiserver:
    #  resources: {}
    # controllerManager:
    #  resources: {}
    redis:
      enabled: false
      volumeSize: 2Gi
    openldap:
      enabled: false
      volumeSize: 2Gi
    minio:
      volumeSize: 20Gi
    monitoring:
      # type: external
      endpoint: http://prometheus-operated.kubesphere-monitoring-system.svc:9090
      GPUMonitoring:
        enabled: false
    gpu:
      kinds:
      - resourceName: "nvidia.com/gpu"
        resourceType: "GPU"
        default: true
    es:
      # master:
      #   volumeSize: 4Gi
      #   replicas: 1
      #   resources: {}
      # data:
      #   volumeSize: 20Gi
      #   replicas: 1
      #   resources: {}
      logMaxAge: 7
      elkPrefix: logstash
      basicAuth:
        enabled: false
        username: ""
        password: ""
      externalElasticsearchHost: ""
      externalElasticsearchPort: ""
  alerting:
    enabled: true
    # thanosruler:
    #   replicas: 1
    #   resources: {}
  auditing:
    enabled: false
    # operator:
    #   resources: {}
    # webhook:
    #   resources: {}
  devops:
    enabled: false
    # resources: {}
    jenkinsMemoryLim: 8Gi
    jenkinsMemoryReq: 4Gi
    jenkinsVolumeSize: 8Gi
  events:
    enabled: false
    # operator:
    #   resources: {}
    # exporter:
    #   resources: {}
    # ruler:
    #   enabled: true
    #   replicas: 2
    #   resources: {}
  logging:
    enabled: true
    logsidecar:
      enabled: true
      replicas: 2
      # resources: {}
  metrics_server:
    enabled: false
  monitoring:
    storageClass: ""
    node_exporter:
      port: 9100
      # resources: {}
    # kube_rbac_proxy:
    #   resources: {}
    # kube_state_metrics:
    #   resources: {}
    # prometheus:
    #   replicas: 1
    #   volumeSize: 20Gi
    #   resources: {}
    #   operator:
    #     resources: {}
    # alertmanager:
    #   replicas: 1
    #   resources: {}
    # notification_manager:
    #   resources: {}
    #   operator:
    #     resources: {}
    #   proxy:
    #     resources: {}
    gpu:
      nvidia_dcgm_exporter:
        enabled: false
        # resources: {}
  multicluster:
    clusterRole: none
  network:
    networkpolicy:
      enabled: false
    ippool:
      type: none
    topology:
      type: none
  openpitrix:
    store:
      enabled: true
  servicemesh:
    enabled: false
    istio:
      components:
        ingressGateways:
        - name: istio-ingressgateway
          enabled: false
        cni:
          enabled: false
  edgeruntime:
    enabled: false
    kubeedge:
      enabled: false
      cloudCore:
        cloudHub:
          advertiseAddress:
            - ""
        service:
          cloudhubNodePort: "30000"
          cloudhubQuicNodePort: "30001"
          cloudhubHttpsNodePort: "30002"
          cloudstreamNodePort: "30003"
          tunnelNodePort: "30004"
        # resources: {}
        # hostNetWork: false
      iptables-manager:
        enabled: true
        mode: "external"
        # resources: {}
      # edgeService:
      #   resources: {}
  terminal:
    timeout: 600

3.4 执行安装

./kk create cluster -f kubesphere-v331-v122123.yaml

此节点之所以安装kubesphere是因为kk在安装过程中会产生kubekey文件夹并将k8s所需要的依赖都下载到kubekey目录。后续我们离线安装主要使用kubekey文件夹，配合一下脚本代替之前的制品。

4. 制作离线部署资源

4.1 导出k8s基础依赖包

yum -y install openssl socat conntrack ipset ebtables chrony ipvsadm --downloadonly --downloaddir /root/kubesphere/k8s-init
# 打成压缩包
tar -czvf k8s-init-Kylin_V10-arm.tar.gz ./k8s-init/*

4.2 导出ks需要的镜像

导出ks相关的镜像至ks3.3.1-images.tar

docker save -o ks3.3.1-images.tar  dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.27.3  dockerhub.kubekey.local/kubesphereio/cni:v3.27.3  dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.27.3  dockerhub.kubekey.local/kubesphereio/node:v3.27.3  dockerhub.kubekey.local/kubesphereio/ks-console:v3.3.1  dockerhub.kubekey.local/kubesphereio/alpine:3.14  dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.22.20  dockerhub.kubekey.local/kubesphereio/ks-controller-manager:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-installer:v3.3.1  dockerhub.kubekey.local/kubesphereio/ks-apiserver:v3.3.1  dockerhub.kubekey.local/kubesphereio/openpitrix-jobs:v3.3.1  dockerhub.kubekey.local/kubesphereio/kube-apiserver:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-proxy:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-controller-manager:v1.22.12  dockerhub.kubekey.local/kubesphereio/kube-scheduler:v1.22.12  dockerhub.kubekey.local/kubesphereio/provisioner-localpv:3.3.0  dockerhub.kubekey.local/kubesphereio/linux-utils:3.3.0  dockerhub.kubekey.local/kubesphereio/kube-state-metrics:v2.5.0  dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6  dockerhub.kubekey.local/kubesphereio/prometheus-config-reloader:v0.55.1  dockerhub.kubekey.local/kubesphereio/prometheus-operator:v0.55.1  dockerhub.kubekey.local/kubesphereio/thanos:v0.25.2  dockerhub.kubekey.local/kubesphereio/prometheus:v2.34.0  dockerhub.kubekey.local/kubesphereio/fluentbit-operator:v0.13.0   dockerhub.kubekey.local/kubesphereio/node-exporter:v1.3.1  dockerhub.kubekey.local/kubesphereio/kubectl:v1.22.0  dockerhub.kubekey.local/kubesphereio/notification-manager:v1.4.0  dockerhub.kubekey.local/kubesphereio/notification-tenant-sidecar:v3.2.0  dockerhub.kubekey.local/kubesphereio/notification-manager-operator:v1.4.0  dockerhub.kubekey.local/kubesphereio/alertmanager:v0.23.0  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.11.0  dockerhub.kubekey.local/kubesphereio/docker:19.03  dockerhub.kubekey.local/kubesphereio/metrics-server:v0.4.2  dockerhub.kubekey.local/kubesphereio/pause:3.5  dockerhub.kubekey.local/kubesphereio/configmap-reload:v0.5.0  dockerhub.kubekey.local/kubesphereio/snapshot-controller:v4.0.0  dockerhub.kubekey.local/kubesphereio/mc:RELEASE.2019-08-07T23-14-43Z  dockerhub.kubekey.local/kubesphereio/minio:RELEASE.2019-08-07T01-59-21Z  dockerhub.kubekey.local/kubesphereio/kube-rbac-proxy:v0.8.0  dockerhub.kubekey.local/kubesphereio/coredns:1.8.0   dockerhub.kubekey.local/kubesphereio/defaultbackend-amd64:1.4 dockerhub.kubekey.local/kubesphereio/redis:5.0.14-alpine dockerhub.kubekey.local/kubesphereio/k8s-dns-node-cache:1.15.12 dockerhub.kubekey.local/kubesphereio/node:v3.23.2 dockerhub.kubekey.local/kubesphereio/pod2daemon-flexvol:v3.23.2 dockerhub.kubekey.local/kubesphereio/cni:v3.23.2 dockerhub.kubekey.local/kubesphereio/kube-controllers:v3.23.2 dockerhub.kubekey.local/kubesphereio/haproxy:2.3 dockerhub.kubekey.local/kubesphereio/busybox:latest dockerhub.kubekey.local/kubesphereio/opensearch:2.6.0 dockerhub.kubekey.local/kubesphereio/fluent-bit:v2.0.6

压缩

gzip ks3.3.1-images.tar

4.3 导出kubesphere文件夹

[root@node1 ~]# cd /root/kubesphere
[root@node1 kubesphere]# ls
create_project_harbor.sh  docker-24.0.7-arm.tar.gz  fluent-bit-daemonset.yaml  harbor-arm.tar.gz  harbor.tar.gz  install.sh  k8s-init-Kylin_V10-arm.tar.gz  ks3.3.1-images.tar.gz  ks3.3.1-offline  push-images.sh

tar -czvf kubeshpere.tar.gz ./kubesphere/*

编写install.sh用于后续一键离线安装kk

#!/usr/bin/env bash
read -p "请先修改机器配置文件ks3.3.1-offline/kubesphere-v331-v12212.yaml中相关IP地址，是否已修改(yes/no)" B 
do_k8s_init(){
        echo "--------开始进行依赖包初始化------"
        yum remove podman -y
        tar zxf k8s-init-Kylin_V10-arm.tar.gz
        cd k8s-init && ./install.sh
        cd -
        rm -rf k8s-init
}

install_docker(){
        echo "--------开始安装docker--------"
        tar zxf docker-24.0.7-arm.tar.gz
        cd docker && ./install.sh
        cd -

}
install_harbor(){
        echo "-------开始安装harbor----------"
        tar zxf  harbor-arm.tar.gz
        cd harbor && ./install.sh
        cd -
        echo "--------开始推送镜像----------"
        source create_project_harbor.sh
        source push-images.sh
        echo "--------镜像推送完成--------"
}
install_ks(){
        echo "--------开始安装kubesphere--------"
#        tar zxf ks3.3.1-offline.tar.gz
        cd ks3.3.1-offline && ./install.sh
}

if [ "$B" = "yes" ] || [ "$B" = "y" ]; then
    do_k8s_init
    install_docker
    install_harbor
    install_ks
else
    echo "请先配置集群配置文件"
    exit 1
fi

5. 离线环境安装k8s和kubesphere

5.1 卸载podman和安装k8s依赖

所有节点都需要操作,

上传k8s-init-Kylin_V10-arm.tar.gz并解压后执行install.sh，如果单节点离线部署可直接使用下一步。

yum remove podman -y

5.2 安装ks集群

上传kubeshpere.tar.gz并解压，修改./kubesphere/ks3.3.1-offline/kubesphere-v331-v12212.yaml集群配置文件中相关ip，密码等信息。修改后执行install.sh，等待十分钟左右可看到如下消息：

**************************************************
Waiting for all tasks to be completed ...
task alerting status is successful  (1/6)
task network status is successful  (2/6)
task multicluster status is successful  (3/6)
task openpitrix status is successful  (4/6)
task logging status is successful  (5/6)
task monitoring status is successful  (6/6)
**************************************************
Collecting installation results ...
#####################################################
###              Welcome to KubeSphere!           ###
#####################################################

Console: http://192.168.10.2:30880
Account: admin
Password: P@88w0rd
NOTES：
  1. After you log into the console, please check the
     monitoring status of service components in
     "Cluster Management". If any service is not
     ready, please wait patiently until all components 
     are up and running.
  2. Please change the default password after login.

#####################################################
https://kubesphere.io             2024-07-03 11:10:11
#####################################################

5.3 其他修改

由于开启了日志功能，arm-麒麟版本fluent-bit一直报错，需更改为2.0.6

kubectl edit daemonsets fluent-bit -n kubesphere-logging-system
#修改其中fluent-bit版本1.8.11为2.0.6

如果不需要日志,可以修改ks创建集群配置文件不安装log插件，镜像也可以更加简化

6.测试查看

6.1 验证集群状态

[root@node1 ~]# kubectl get nodes 
NAME    STATUS   ROLES                         AGE   VERSION
node1   Ready    control-plane,master,worker   25h   v1.22.12
node2   Ready    control-plane,master,worker   25h   v1.22.12
node3   Ready    control-plane,master,worker   25h   v1.22.12

页面查看