网络策略-------理解为防火墙 图片1.png [root@vms61 chap10-net]# kubectl run pod1 --image=nginx --image-pull-policy=IfNotPresent --labels="name=pod1" pod/pod1 created [root@vms61 chap10-net]# kubectl run pod2 --image=nginx --image-pull-policy=IfNotPresent --labels="nam
如果配置文件中的sh改成一个不存在的比如shxxx,且restartPolicy一直未Never的话那么就会一直创建不了,报ContainerCannotRun,也仍然会一直创建;如果restartPolicy改为OnFailure,那么就会一直重启,RESTARTS会一直增加
访问https://metallb.universe.tf/installation/
但如果pod是正常运行的,而pod里面又出了问题,此时deployment是监测不到的。
PAP 使用双向握手来验证客户端会话,而 CHAP 使用三次握手,两种身份验证过程都很常见,但只有一种更安全。
每个pod的IP只能是集群内部可访问,集群里的pod——不管是哪个ns或在哪个节点,都是可以的
在kube-system里有dns,可以自动发现所有命名空间里的服务的clusterIP
MS-CHAP(微软挑战-握手认证协议)、CHAP(挑战-握手认证协议)和PAP(密码认证协议)都是用于网络连接的认证协议,它们各自具有不同的特点和适用场景。
PPP协议(Point-to-Point Protocol)是点到点协议,是一种常用的串行链路层协议,用于在两个节点之间建立点对点连接。它可以用于拨号网络、虚拟专用网络(VPN)和其他类型的点对点连接。
其实worker节点没必要做高可用,如果把worker2关机,等一段时间就会发现,pod都会在worker1上运行 ,当worker2重启后pod也不会回到worker2上运行
在使用PAP认证的PPP协议中,通信的双方都既是认证端,又是被认证端,需要进行双向认证。配置认证时,需要首先在认证端添加一系列账号和密码对。同时在被认证端配置其中的一个账号密码对,使得被认证端可以通过该账号密码取得认证端的认证。
· PPP可以用于多种类型的物理介质上,包括串口线、电话线、光纤(例如SDH),也用于Internet接入。
创建一本书首先进入gitbook的官网:https://www.gitbook.com/
1.运行集群存储 daemon,例如在每个 Node 上运行 glusterd、ceph
创建一本书 首先进入gitbook的官网:https://www.gitbook.com/
6.在RTB上配置NAT以及各路由器的静态路由实现H公司局域网用户通过NAT 转换访问SWC及PCB:
K8S 1.17.x 之前创建deploy的命令选项很多,但从1.18.x开始就变得少了
元素 (或HTML锚元素, Anchor Element)通常用来表示一个锚点/链接。但严格来说,元素不是一个链接,而是超文本锚点,可以链接到一个新文件、用id属性指向任何元素。如果没有元素没有href属性的话,可以作为原本链接位置的占位符,常用于home链接
通过检测pod CPU的负载,解决deployment里某pod负载太重,动态伸缩pod的数量来负载均衡
广域网中经常会使用串行链路来提供远距离的数据数据传输,高级数据链路控制HDLC(High-level Data Link Control)和点对点协议PPP(Point to point Protocol)是两种典型的串口封装协议。
registerXPathNamespace()函数为下一个 XPath 查询创建命名空间上下文。
注册工厂是一种很常用的框架书写方法,它适合于快速创建相同类型的对象。 举个栗子 比如一个家具工厂,有沙发、椅子、茶几等等,正常的编程模式是这样的: //创建 class 沙发{} class 椅子{} class 茶几{} //使用 new 沙发(); new 椅子(); new 椅子(); new 茶几(); 如果想要扩展,就需要继续定义class,然后new对象。 但是其实沙发的制作与使用时解耦的,使用者并不需要知道沙发、茶几是怎么制作出来的,只是想使用它而已。 使用注册工厂,相当于沙发、茶几、
6、配置PPP: PPP(Point-to-Point Protocol)是SLIP(Serial Line IP protocol)的继承者,它提供了跨过同步和异步电路实现路由器到路由器(router-to-router)和主机到网络(host-to-network)的连接。 CHAP(Challenge Handshake Authentication Protocol)和PAP(Password Authentication Protocol) (PAP)通常被用于在PPP封装的串行线路上提供安全性认证。使用CHAP和PAP认证,每个路由器通过名字来识别,可以防止未经授权的访问。 CHAP和PAP在RFC 1334上有详细的说明。 A. 有关命令 端口设置 任务 命令 设置PPP封装 encapsulation ppp1 设置认证方法 ppp authentication {chap | chap pap | pap chap | pap} [if-needed] [list-name | default] [callin] 指定口令 username name password secret 设置DCE端线路速度 clockrate speed 注:1、要使用CHAP/PAP必须使用PPP封装。在与非Cisco路由器连接时,一般采用PPP封装,其它厂家路由器一般不支持Cisco的HDLC封装协议。 2. 举例 路由器Router1和Router2的S0口均封装PPP协议,采用CHAP做认证,在Router1中应建立一个用户,以对端路由器主机名作为用户名,即用户名应为router2。同时在Router2中应建立一个用户,以对端路由器主机名作为用户名,即用户名应为router1。所建的这两用户的password必须相同。 设置如下: Router1: hostname router1 username router2 password xxx interface Serial0 ip address 192.200.10.1 255.255.255.0 clockrate 1000000 ppp authentication chap ! Router2: hostname router2 username router1 password xxx interface Serial0 ip address 192.200.10.2 255.255.255.0 ppp authentication chap 7、广域网配置实例 DDR Example Dial Backup Example Configure subinterface Example Frame Relay Switching Example Channelized E1 Interface Example X.25 Example DDR Example 例: Configuration for RouterA: ip route 131.108.29.0 131.108.126.2 ip route 131.108.1.0 131.108.126.2 dialer-list 1 protocol ip permit dialer-list 1 protocol ipx deny ! interface serial 0 ip address 131.108.126.1 255.255.255.0 dialer in-band dialer-group 1 ! dialer map ip 131.108.126.2 5551234 ! dialer idle-timeout 300 Dial Backup Example A)同步V.25 bits方式 Configuration for RouterA: interface Serial0:0 backup delay 0 10 backup interface Serial10 ip address 16.217.30.2 255.255.255.252 ! interface Serial10 ip address 16.30.16.81 255.255.255.0 encapsulation ppp dialer in-band dialer string 8
前面了解了典型的AOP基于配置的使用方法,下面介绍下如何依赖于注解来实现AOP。 基于注解降低了配置文件的复杂程度,但是引入了程序间的耦合,其中的优劣待用户自己判断了。 需要注意的是,确定AspectJ与JDK之间的版本,否则会报错,详情请见。 首先看一下基于注解的切面类,这时的切面不仅仅是一个POJO类了,与AOP进行了紧密的耦合。但是配置过程和方式都与原来的方式差不多。 package com.spring.test.chap44; import org.aspectj.lang.ann
C.Authentication D. Dead E. Terminate
Week02 2016/09/22上午1-4节 一、复习:新建一个空的AS项目Chap2AsProj MainActivity.java(在目录Chap2AsProj\app\src\main\java\com\kamin\dr\chap2asproj) activity_main.xml(在目录Chap2AsProj\app\src\main\res\layout) strings.xml(在目录Chap2AsProj\app\src\main\res\values) R.java(Chap2
Ceph 块设备(也叫RBD)服务提供了大小可调、精炼、支持快照和克隆的块设备。为提供高性能, Ceph 把块设备条带化到整个集群。 Ceph 同时支持内核对象( KO ) 和 QEMU 管理程序直接使用 librbd ——避免了内核对象在虚拟系统上的开销。
在实际中会经常遇到对接外网不通的情况,很多时候又容易被忽略,结果排查半天发现是外网线路的事,这一篇我们来接下常见的外网对接有哪些故障。
”事情很少有根本做不成的;其所以做不成,与其说是条件不够,不如说是由于决心不够。“ ”Few things are impossible in themselves; and it is often for want of will, rather than of means, that man fails to succeed.“
随着ESXI 主机的广泛应用,存储的应用也越来越多,ESXI主机配置上共享存储,那么功能将更加强大,这里为了方便实验,只能通过软件平台来实现这个功能,所以今天来介绍下Openfiler 的安装与配置过程
[H3C]local-user server [H3C-luser-server]password simple 123456 [H3C-luser-server]service-type ppp [H3C-luser-server]quit [H3C]int Virtual-Template 1 [H3C-Virtual-Template1]ppp authentication-mode chap [H3C-Virtual-Template1]ppp chap user client [H3C-Virtual-Template1]ip add 192.168.1.1 255.255.255.0 [H3C-Virtual-Template1]remote address 192.168.1.5 [H3C-Virtual-Template1]quit [H3C]int e0/1/0 [H3C-Ethernet0/1/0] [H3C-Ethernet0/1/0]pppoe-server bind virtual-template 1 [H3C-Ethernet0/1/0]quit
XX公司的一个分支机构正在建设中。根据公司的设计需要,分支机构的网络只能使用192.168.1x.0/24的网段,该网络中共有3个部门(分别是工程部、市场部、研发部)和一个DMZ区域(存放一台Server向企业内网和Internet提供网络服务)。
PPP 是一种广泛应用的链路层协议,旨在提供点对点网络通信的稳定性和可靠性。它是连接计算机世界的纽带,允许设备之间建立数据链路并进行通信。本文将深入探讨PPP的不同方面,包括其基础、协商过程、应用领域、安全性和未来展望。
一种是通过虚拟接口类实现MP(Virtual Template): 可以利用用户名进行确定捆绑 一个VT接口可以派生多个捆绑
书中,大部分出现hydro的地方,直接替换为indigo或jade或kinetic,即可在对应版本中使用。
可以看到系统为CentOS release 6.2 (Final) 二、软件安装
<!-- /* Font Definitions */ @font-face {font-family:宋体; panose-1:2 1 6 0 3 1 1 1 1 1; mso-font-alt:SimSun; mso-font-charset:134; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:3 135135232 16 0 262145 0;} @font-face {font-family:"Cambria Math"; panose-1:0 0 0 0 0 0 0 0 0 0; mso-font-charset:1; mso-generic-font-family:roman; mso-font-format:other; mso-font-pitch:variable; mso-font-signature:0 0 0 0 0 0;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-1610611985 1073750139 0 0 159 0;} @font-face {font-family:"\@宋体"; panose-1:2 1 6 0 3 1 1 1 1 1; mso-font-charset:134; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:3 135135232 16 0 262145 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide:no; mso-style-qformat:yes; mso-style-parent:""; margin:0cm; margin-bottom:.0001pt; text-align:justify; text-justify:inter-ideograph; mso-pagination:none; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:宋体; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt;} span.smallbody {mso-style-name:smallbody; mso-style-unhide:no;} .MsoChpDefault {mso-style-type:export-only; mso-default-props:yes; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} /* Page Definitions */ @page {ms
1)磁盘阵列:磁盘阵列是一种采用RAID技术、冗余技术和在线维护技术制造的一种高性能、高可用的磁盘存储设备。
已知192.168.14.112节点,存在目标器 iqn.2015.06.cn.hrbyg.www.ygcs.c0a802b8:wzg,未设置CHAP,存在目标器 iqn.2015.06.cn.hrbyg.www.ygcs.c0a802b8:wzgchap,设置CHAP用户名为mychap,CHAP密码为mypassword。
本手册建议以裸磁盘vdb作为示例,其他类型配置参考《002.iSCSI服务端多类型配置》。
中国高分辨率高质量PM10数据集(2000-2021,年度)利用人工智能技术,使用模式资料填补了卫星MODIS MAIAC AOD产品的空间缺失值,结合地基观测、大气再分析和排放清单等大数据生产得到2000年至2021年全国无缝隙地面PM10数据。数据十折交叉验证决定系数R2为0.9,均方根误差RMSE为21.12 µg/m3。主要范围为整个中国地区,空间分辨率为1km,单位为µg/m3。
创建vpn账户[root@pptp-server ~]# vim /etc/ppp/chap-secrets [root@pptp-server ~]# cat /etc/ppp/chap-secrets # Secrets for authentication using CHAP# clientserversecretIP addresses#testvpn pptpd testvpnabc *[root@pptp-server ~]# Tip:密码是可以在线修改的密码可以使用字母大小写Aa!@$%
今天我们来体验下Ceph原生的ISCSI,可能会有人说哪来的原生ISCSI啊,相信细心的童鞋在Ceph L版本发布的时候官网手册里面就出现了一个iscsi的字样。是的,没错,这就是原声版的ISCSI雏形,有好消息就有坏消息,不幸的是,截至到目前为止还不能使用rpm安装,因为红帽没有把rpm释放出来,只能通过git源码或别人分享的rpm包进行安装。
本文作者 / Wenda 关注存储以及周边生态,独立的存储系统生存太艰难,融入生态才体现价值。 1、背 景 我们Ceph作为后端存储时,这里只针对块存储空间的使用进行讨论。 对于块存储空间,Linux用户的使用方法有多种,如:rbd map方式、rbd-nbd map方式、 rbd-fuse方式, 但是对于Windows用户,如何使用呢?--- 答案:通过ISCSI访问。 2、说 明 针对块存储场景,iSCSI gateway的作用: 1) 采用ceph作为后端存储时,通过iSCSI协议为Wi
网络层控制协议族(NCP): 主要用来协商在该数据链路上所传输的数据包的格式与类型。
Apache IoTDB 已经在很多物联网系统中得到了应用。为了让大家理解工业物联网的时序数据是如何采集、存储、查询分析,并进行可视化。我们做了一个IoTDB展示台,这是一个 IoTDB 在实际应用中功能的缩小版,展示了 IoTDB 管理物联网时序数据的几种常见场景。
ip address 172.16.0.1 255.255.0.0 配置接口的 ip 地址
java.io包下有一个File类,File就是文件或文件夹。API中File的解释是文件和目录路径名的抽象表示形式,即通过指定路径名称来表示磁盘或网络中的某个文件或目录。也就是说,程序中的文件和目录都可以通过File类的对象来完成,如新建、删除、重命名文件和目录等。
领取专属 10元无门槛券
手把手带您无忧上云