= file.toUtf8(); QNetworkReply *reply = request->auth(deviceUrl, dataSend); emit sendData(dataSend...= file.toUtf8(); QNetworkReply *reply = request->post(deviceUrl, dataSend); emit sendData(dataSend...= file.toUtf8(); QNetworkReply *reply = request->post(deviceUrl, dataSend); emit sendData(dataSend...= file.toUtf8(); QNetworkReply *reply = request->auth(mediaUrl, dataSend); emit sendData(dataSend...= file.toUtf8(); QNetworkReply *reply = request->auth(mediaUrl, dataSend); emit sendData(dataSend
= new UInt16[MAX_ARGS_LENTH]; for (int i = 0; i < MAX_ARGS_LENTH; i++) { dataSend[i...] = UNDEFINECMD; } dataSend[0] = 1; dataSend[1] = 0; dataSend[2] = 0; dataSend[3...] = (byte)id; dataSend[4] = (byte)(value & 0x00ff); dataSend[5] = (byte)(value >> 8); makeAndSendCmd...= new byte[50]; byte lenth; dataSend[0] = 0x55; dataSend[1] = 0x55; dataSend[3] = (byte...i + 2); //填入长度信息 dataSend[2] = lenth; WriteData(dataSend, lenth + 2); } 那么其它几种控制方式也就大同小异了
string strQuery = "msg="; strQuery += HttpUtility.UrlEncode(msg); strQuery += "&type=0"; string dataSend...= strQuery; req.ContentLength = dataSend.Length; byte [] buff = Encoding.UTF8.GetBytes(dataSend);
send/getEvent.xml"); file = file.arg(device->request->getUserToken()).arg(timeout); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = device->request->post(device->deviceUrl, dataSend);...emit sendData(dataSend, device->deviceUrl); //启动事件定时器 if (!...file.arg(device->request->getUserToken()).arg(uuid).arg(device->eventUrl).arg(timeout); QByteArray dataSend...= file.toUtf8(); device->request->post2(device->eventUrl, dataSend); emit sendData(dataSend,
getFile(":/send/getEvent.xml"); file = file.arg(request->getUserToken()).arg(timeout); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = request->post(deviceUrl, dataSend); emit sendData(dataSend...; file = file.arg(request->getUserToken()).arg(uuid).arg(eventUrl).arg(timeout); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = request->post(eventUrl, dataSend); emit sendData(dataSend
●datasend函数 datasend = function(socket, data) 发送邮件内容。...\r\n".. result -- 邮件发送 local st2 ,resp2 = smtp.datasend(socket,senddata) print...Files (x86)\\Nmap\\nselib\\sendmail.py"') ●关于扩展smtp.lua库 其实smtp库的各种连接，登陆，发送数据，完全可以用socket来直接完成了，之前一直不会用datasend
; $smtp- mail($mail_user); $smtp- to($to_address); $smtp- data(); # begin the data $smtp- datasend($...from); # set user $smtp- datasend($subject); # set subject $smtp- datasend("\n\n"); $smtp- datasend("
double Test3_double; }data; }; //Receive Data Pack //用于打包发送数据，使用union是便于接收和获取对应的数据 union DataSend...QfxClassUDP.lib") HANDLE g_Mutex; //互斥量 QfxUDP g_UDPClass;//我的UDP类对象 IPandPort g_RemoteIPPort;//远端IP地址和端口号 DataSend...mySend;//要发送的数据 DataSend myRece;// 接收的数据 DWORD WINAPI UDP_Rece_ThreadProc(LPVOID pParam); BOOL initMain
return 0; } QString file = device->request->getSendData("GetDeviceInformation"); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = device->request->auth(device->deviceUrl, dataSend);...emit sendData(dataSend, device->deviceUrl); OnvifDevice::DeviceInfo *deviceInfo = 0; QByteArray
} } else { file = file.arg(userToken).arg(profileToken); } QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = device->request->post(device->ptzUrl, dataSend); QByteArray...= file.toUtf8(); QNetworkReply *reply = device->request->post(device->ptzUrl, dataSend); QByteArray.../PtzGetPresets.xml"); file = file.arg(device->getUserToken()).arg(profileToken); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = device->request->post(device->mediaUrl, dataSend);
QString(); } QString file = device->request->getSendData(key, true, xmlns); QByteArray dataSend...一般请求都是很快的 除非对方不在线则卡很久 需要设置下超时时间 QNetworkReply *reply = device->request->post(device->deviceUrl, dataSend..., 1000); emit sendData(dataSend, device->deviceUrl); QStringList results; QByteArray dataReceive
getSnapshotUri.xml"); file = file.arg(device->request->getUserToken()).arg(profileToken); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = device->request->post(device->mediaUrl, dataSend); emit...sendData(dataSend, device->mediaUrl); QByteArray dataReceive; bool ok = device->checkData(reply
QString(); } QString file = device->request->getSendData(key, true, xmlns); QByteArray dataSend...一般请求都是很快的 除非对方不在线则卡很久 需要设置下超时时间 QNetworkReply *reply = device->request->post(device->deviceUrl, dataSend..., 3000); emit sendData(dataSend, device->deviceUrl); QStringList results; QByteArray dataReceive
getSnapshotUri.xml"); file = file.arg(request->getUserToken()).arg(profileToken); QByteArray dataSend...= file.toUtf8(); QNetworkReply *reply = request->post(mediaUrl, dataSend); emit sendData(dataSend
char*)USART3_RX_BUFFER,">")) { //继续发送数据 USARTx_DataSend...char*)USART3_RX_BUFFER,">")) { //继续发送数据 USARTx_DataSend...(USARTx->SR&1<<7)){} } } /* 函数功能: 数据发送 */ void USARTx_DataSend(USART_TypeDef *USARTx,u8 *data,u32
double Test3_double; }data; }; //Receive Data Pack //用于打包发送数据，使用union是便于接收和获取对应的数据 union DataSend
示例代码： DataSend mySend;//要发送的数据 DataSend myRece;// 接收的数据 ······ //--------------------发送打包---------
QString file = OnvifXml::getSendData(device->getUserToken(), key, true, xmlns); QByteArray dataSend...一般请求都是很快的 除非对方不在线则卡很久 需要设置下超时时间 QNetworkReply *reply = device->request->post(device->onvifAddr, dataSend
char*)USART3_RX_BUFFER,">")) { //继续发送数据 USARTx_DataSend...char*)USART3_RX_BUFFER,">")) { //继续发送数据 USARTx_DataSend
(strstr((char*)USART3_RX_BUFFER,">")) { //继续发送数据 USARTx_DataSend
领取专属 10元无门槛券
手把手带您无忧上云
云服务器
ICP备案
对象存储
即时通信 IM
实时音视频
