Genymobile Windows XP: C:\Documents and Settings\USER\Local settings\Application Data\Genymobile Linux
前言 Linux将所有的设备统一抽象为struct device结构, 同时将所有的驱动统一抽象为struct device_driver结构。...本小节先分析device结构,以及相关API,以及如何注册到系统中,以及提供给上层的sys接口。 数据结构 Linux将所有的设备统一抽象为struct device结构。...定义在 struct device { struct device *parent; struct device_private *p; struct kobject...); //删除设备的内核模块 put_device(parent); } 设备属性 linux中使用device_attribute结构体表示一个设备的属性 struct device_attribute...关于设备属性的调用过程,最终会调用到设备的show和store函数中,具体的流程分析可见Linux设备驱动模型-Ktype static ssize_t dev_attr_show(struct kobject
“A data structure by which bootloaders pass hardware layout to Linux in a device-independent manner,...在linux下,make dtbs可单独编译dtb。以下截取了TEGRA平台的一部分。...与linux对应的是do_bootm_linux。...① boot_prep_linux 为启动后的kernel准备参数 ② boot_jump_linux 以上是boot_jump_linux的片段代码,可以看出:若使用DTB,则原先用来存储ATAG的寄存器...boot_jump_linux最后将调用kernel_entry,将.dtb镜像地址传给内核。
Linux device drivers (second edition). Ed. O’Reilly....about Linux device drivers....Take any device that doesn’t work on Linux, but has a very similar chipset to another device which does...have a proven device driver for Linux....The reason for this choice is that good documentation for writing device drivers, the Linux device drivers
从Linux 2.6起引入了一套新的驱动管理和注册机制:Platform_device和Platform_driver。...Linux中大部分的设备驱动,都可以使用这套机制, 设备用Platform_device表示,驱动用Platform_driver进行注册。...Linux platform driver机制和传统的device driver 机制(通过driver_register函数进行注册)相比,一个十分明显的优势在于platform机制将设备本身的资源注册进内核...在2.6内核中platform设备用结构体platform_device来描述,该结构体定义在kernel/include/linux/platform_device.h中, struct platform_device...参考资料: linux-2.6.24/Documentation/driver-model/platform.txt 《platform _device和platform_driver注册过程》 platform_device_register
后记: 在Linux进行PEX网络装机时,因为综合性强,细节较多,容易出错,但一定要检查去找出这个错误。
网卡上增加一个IP: ifconfig eth0:1 192.168.0.1 netmask 255.255.255.0删除网卡的第二个IP地址: ip addr del 192.168.0.1
字面上理解,磁盘上没有多余的空间了。 1/先用df命令查看当前计算器磁盘空闲情况 df -a image.png /dev/mapper/vg_spark...
前言:IPIP隧道是一种三层隧道,通过把原来的IP包封装在新的IP包里面,来创建隧道传输。...本篇简单分析Linux(2.6.32版本)中的IPIP隧道的实现过程,期望有所借鉴,造出轮子:-) 一....IPIP的初始化 Linux中的IPIP隧道文件主要分布在tunnel4.c和ipip.c文件中。...因为是三层隧道,在IP报文中填充的三层协议自然就不能是常见的TCP和UDP,所以,Linux抽象了一个隧道层,位置就相当于传输层,主要的实现就是在tunnel4.c中。...IPIP的接收 我们之前说到过,对应从网卡收上来的报文,过完链路层后就会到ip_rcv()中,大概是这样的路线: ip_rcv()->ip_rcv_finish()->ip_local_deliver
对于很多刚刚接触linux的朋友来说,如何设置linux系统的IP地址,作为第一步,下面学习啦小编以centos系统为例,给大家演示如何给centos设置IP地址 设置linux系统的IP地址方法...1、自动获取IP地址 虚拟机使用桥接模式,相当于连接到物理机的网络里,物理机网络有DHCP服务器自动分配IP地址。...#dhclient 自动获取ip地址命令 #ifconfig 查询系统里网卡信息,ip地址、MAC地址 分配到ip地址后,用物理机进行ping ip地址,检测是否ping通。...物理机网络连接VMNet8 手动设置ip地址 192.168.20.1 子网掩码255.255.255.0 网关和DNS地址为192.168.20.2(即虚拟机NAT的网关地址) 编辑linux网卡eth0...看过“ 如何设置linux系统的IP地址 ”的人还看了: 版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。
[导读] 前文分析了Linux设备驱动的驱动模型,本文来聊聊Platform_driver/Platform_device这个类。做嵌入式Linux的驱动,这个也是绕不开的,所以来学习分析总结一下。...上文阅读: 注:代码分析基于linux-5.4.31 为什么有Platform_driver 前文谈到的总线驱动模型(注这个图是照着bootlin的文档绘制的): 同时,根据代码分析其基础数据结构框架关系如下.../include/linux/platform_device.h中,来梳理一下这些数据结构间的关系: platform_device 用于抽象平台设备 platform_driver 用于抽象匹配平台设备对应的驱动程序...struct resource就是用于抽象描述驱动程序需要用到的硬件资源,struct resource 被包进platform_device,实现与 struct platform_device关联。...SERIAL_SAMSUNG_PM_OPS, .of_match_table = of_match_ptr(s3c24xx_uart_dt_match), }, }; 总结一下 对于做嵌入式Linux
原文出自:http://blog.csdn.net/ghostyu/article/details/6908805 一个现实的linux设备和驱动通常要挂接在一种总线上,像pci,usb,iic,spi...基于这个背景,linux发明了一种虚拟总线:platform总线,相应的设备称为platform_device,而驱动成为platform_driver。...注意,platform_device并不是与自负设备,块设备等平行的概念,而是linux提供的一种附加手段,例如s3c2440处理器中,把内部集成的iic,rtc,spi,lcd,watchdog,等控制器归纳为...;}; platform_device成员变量 1、struct device(部分),include [cpp] view plain copy...一般实现platform_driver时,除了实现file_operations中的read、write等函数外,还要实现platform_driver中的probe与remove等函数,其余均按正常的linux
device_init_wakeup() static inline int device_init_wakeup(struct device *dev, bool val) { device_set_wakeup_capable...static inline void device_set_wakeup_capable(struct device *dev, bool capable) { dev->power.can_wakeup...= capable; } static inline int device_set_wakeup_enable(struct device *dev, bool enable) { dev->power.should_wakeup...看struct device结构体,里面有一个成员struct dev_pm_info power,来看一看struct dev_pm_info,来自include/Linux/pm.h文件: struct...* pm_parent; struct list_head entry; #endif }; 这些都是电源管理部分的核心数据结构,can_wakeup为1时 表明一个设备可以被唤醒,设备驱动为了支持linux
📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 📷 ...
P Masquerade 是 Linux 发展中的一种网路功能.如果一台 Linux 主机使用 IP Masquerade 功能连线到网际网路上,那麽接上它的电脑(不论是在同一个区域网路上或藉由数据机连线...)也可以接触网际网路,即使它们没有获得正式指定的 IP 位址....—-+ to provider | Linux | SLIP/PPP | Anybox | <———- modem1| |modem2 ———– modem | | 111.222.333.444...| | 192.168.1.100 | | +————+ +————-+ 上面的草图中一台安装并执行 ip_masquerading 的 Linux 机器使用 modem1 经由 SLIP...第二个系统(不必是执行 Linux 的系统)拨接进入 Linux 机器并起始 SLIP/or/PPP 连结.它在网际网路上并没有指定的 IP 位址所以它使用 192.168.1.100.
然后在应用层就能通过cat和echo命令来对sys创建出来的文件进行读写驱动设备,实现交互. 2.DEVICE_ATTR()宏定义 DEVICE_ATTR()定义位于include/linux/device.h..., set_my_device); //定义一个名字为my_device_test的设备属性文件 最终将宏展开为: struct device_attribute dev_attr_my_device_test...()便来创建上面my_device_test设备文件. 3.使用示例 示例代码如下: #include #include #include #include #include #include #include... #include #include static char mybuf[100
讲解Make sure the device specification refers to a valid device在开发和配置设备时,我们经常会遇到"Make sure the device specification...refers to a valid device"这个错误信息。...包含了设备的标识符和对应的设备名称 device_database = { '123456': 'Device A', '789012': 'Device B',...'345678': 'Device C' } if identifier not in device_database: raise ValueError("Invalid device...总结"Make sure the device specification refers to a valid device"是一个常见的错误信息,通常与设备规格和标识符有关。
前言 per-device PM QoS是针对指定设备的QoS framework,背后的思考如下: 1)resume_latency 在Runtime PM的框架下,当device的引用计数减为0的时候...,RPM会suspend该device。...API汇整 2.1 struct dev_pm_qos数据结构 每个设备的per-device pm qos信息,都保存在设备的qos指针中,即: 1: struct device { 2:...struct pm_qos_constraints为pm qos要求的具体抽象,可参考“Linux PM QoS framework(2)_PM QoS class”中的描述; latency_tolerance...2.2 向kernel其它driver提供的,用于提出per-device PM QoS需求的API int dev_pm_qos_add_request(struct device *dev, struct
platform device ================= 头文件:linux/platform_device.h 为什么使用 platform device?...从驱动的角度,为了获取这些挂接在soc内存空间的外设的资源,linux系统专门定义了一类总线来 挂接它们。...platform device的作用就是描述片内外设的资源,结构体的定义如下 struct platform_device{ const char *name; // 设备号...struct platform_device *);//恢复 struct device_driver driver;//设备驱动 const struct platform_device_id...(struct platform_device *); 单独对某个platform device进行注册 platform data: platform_device结构体中的
设置ip地址 打开终端,取得root权限(sudo su)。...输入命令: # ifconfig eth0 192.168.0.20 netmask 255.255.255.0 详解:ifconfig — 设置ip的命令 eth0 — 要设置的网卡,可以只输入ifconfig...查看已安装网卡 192.168.0.20 — 预设置的IP值。...route add default gw 192.168.1.1 详解:route add — 增加路由命令 default gw — 增加的路由项目为默认网关 192.168.1.1 — 默认网关的 ip...开机自动设置IP ,网关。 linux开机后会执行/etc/init.d/rcS 脚本,打开rcS脚本,将上述两命令加入脚本中即可,rcS文件内容如下: #!
领取专属 10元无门槛券
手把手带您无忧上云