configure error xml2-config not found. please check your libxml2 installation sendos 5.5 安装 PHP 5.4.3...报 configure error xml2-config not found. please check your libxml2 installation 错误 检查是否安装了libxm包 [root...[root@rh-linux /]# yum install libxml2 [root@rh-linux /]# yum install libxml2-devel -y ——————————————...: xml2-config not found....’s yum install openssl-devel configure: error: Please reinstall the libcurl distribution - easy.h should
过程回顾： [root@test2 ~]# kubeadm init --apiserver-advertise-address=192.168.2.129 --image-repository registry.aliyuncs.com...问题解决： [root@test2 ~]# kubeadm reset //重启kubeadm [reset] WARNING: changes made to this host by 'kubeadm...X If your cluster was setup to utilize IPVS, run ipvsadm --clear (or similar) to reset your system's...[root@test2 ~]# kubeadm init \ --apiserver-advertise-address=192.168.2.129 \ --image-repository registry.aliyuncs.com...cluster-administration/addons/ You can now join any number of machines by running the following on each node as root
key. 2.The right subtree of a node contains only nodes with keys greater than or equal to the node’s...If U or V is not found in the BST, print in a line ERROR: U is not found.or ERROR: V is not found. or...ERROR: 9 is not found. ERROR: 12 and -3 are not found. ERROR: 0 is not found....ERROR: 99 and 99 are not found. 题目分析：题目给出的是BST树，可以利用BST的中序遍历是顺序序列这一性质。...\n",u); else printf("ERROR: %d is not found.
import hashlib时出现如下问题： >>> import hashlib ERROR:root:code for hash md5 was not found....% name) ValueError: unsupported hash type md5 ERROR:root:code for hash sha1 was not found....% name) ValueError: unsupported hash type sha1 ERROR:root:code for hash sha224 was not found....% name) ValueError: unsupported hash type sha224 ERROR:root:code for hash sha256 was not found....% name) ValueError: unsupported hash type sha256 ERROR:root:code for hash sha384 was not found.
Configure: error: xml2-config not found. Please check your libxml2 installation....Configure: error: Please reinstall the BZip2 distribution Solutions : 解决方法:yum install bzip2 bzip2-devel...Configure: error: libjpeg.(also) not found....Solutions : 解决方法:yum install libjpeg libjpeg-devel 6.Configure: error: libpng.(also) not found....(cached) /usr/bin/net-snmp-config configure: error: snmp.h not found.
: xml2-config not found....解决办法是: yum install -y libxml2-devel 还有错误: configure: error: Cannot find OpenSSL's 解决办法是: yum...: Please reinstall the BZip2 distribution 解决办法: yum install -y bzip2 bzip2-devel 错误: configure: error...解决办法: yum install -y libpng libpng-devel 错误: configure: error: freetype.h not found....解决办法: yum install -y freetype freetype-devel 错误: configure: error: mcrypt.h not found.
-ne 0 ] && echo "ERROR: es_env.sh not not found." >&2 && exit 1 [ X$1 = X ] && echo "ERROR: type empty...-ne 0 ] && echo "ERROR: es_env.sh not not found." >&2 && exit 1 # 连接es节点，获取索引，自动发现监控项 for addr in $(...list found." >&2 && exit 1 # 将列表list，转换为发送给zabbx的json数据。...-ne 0 ] && echo "ERROR: es_env.sh not not found." >&2 && exit 1 [ X$1 = X ] && echo "ERROR: node name...-ne 0 ] && echo "ERROR: es_env.sh not not found." >&2 && exit 1 # index count indices_count() { local
http://blog.sina.com.cn/s/blog_75a07c3b0101kcwb.html 错误1：configure: error: Cannot find OpenSSL's <evp.h...the BZip2 distribution 解决：[root@CentOS6 php-5.4.36]# yum install bzip2 bzip2-devel 错误3：configure: error...解决：[root@CentOS6 php-5.4.36]# yum -y install libjpeg-devel 错误4：configure: error: png.h not found....解决：[root@CentOS6 php-5.4.36]# yum -y install libpng-devel 错误5：configure: error: freetype-config not found...解决：[root@CentOS6 php-5.4.36]# yum -y install freetype-devel 错误6：configure: error: mcrypt.h not found.
报错： 错误1： configure: error: xml2-config not found. Please check your libxml2 installation....]# yum install -y libxml2-devel 错误2： configure: error: Cannot find OpenSSL's 说明：缺少OpenSSL's。...解决办法： [root@adailinux php-5.6.30]# yum install -y bzip2-devel 错误4： configure: error: jpeglib.h not found...解决办法： [root@adailinux php-5.6.30]# yum install -y libjpeg-devel 错误5： configure: error: png.h not found...found.
If U or V is not found in the binary tree, print in a line ERROR: U is not found. or ERROR: V is not...found. or ERROR: U and V are not found.....ERROR: 9 is not found. ERROR: 12 and -3 are not found. ERROR: 0 is not found....ERROR: 99 and 99 are not found. 题目分析： 1.求解最近公共祖先。题目中中给出了二叉树的先序遍历和中序遍历，因此可以重构二叉树。...(1)u和v均未在map表中出现过，直接输出a and b are not found (2)u和v只有一个在map表中，直接输出另外一个未找到，a is not found.
with LWP: http://mirrors.163.com/cpan/authors/id/S/SZ/SZABGAB/CHECKSUMS Checksum for /root/.cpan/sources.../authors/id/S/SZ/SZABGAB/Expect-1.32.tar.gz ok Scanning cache /root/.cpan/build for sizes DONE CPAN:...eq "Input/output error") instead of EOF (0 return value)....Good, your raw ptys can handle at least 530 bytes at once. t/test.t .. 5/5 sysread(): Input/output error...Running make for S/SZ/SZABGAB/Expect-1.32.tar.gz Has already been unwrapped into directory /root/.cpan
如果 二叉搜索树中找不到以 U 或 V 为键值的结点，则输出 ERROR: U is not found. 或者 ERROR: V is not found....，或者 ERROR: U and V are not found.。...输入样例1 6 8 6 3 1 2 5 4 8 7 2 5 8 7 1 9 12 -3 0 8 99 99 输出样例1 LCA of 2 and 5 is 3. 8 is an...ERROR: 9 is not found. ERROR: 12 and -3 are not found. ERROR: 0 is not found....ERROR: 99 and 99 are not found.
RSA key fingerprint is 7e:3f:e7:5b:69:74:e3:0e:87:7b:2b:df:3d:64:b3:1e....: JAVA_HOME is not set and could not be found. master: Error: JAVA_HOME is not set and could not be found.... slave0: Error: JAVA_HOME is not set and could not be found. slave1: Error: JAVA_HOME is not set and.../logs/yarn-root-resourcemanager-master.out slave0: Error: JAVA_HOME is not set and could not be found.... slave1: Error: JAVA_HOME is not set and could not be found. master: Error: JAVA_HOME is not set and
' for more details 解决方法 yum install -y gcc 错误 configure: error: xml2-config not found....解决方法 [root@hanfeng php-5.6.30]# yum install -y libxml2-devel 错误 configure: error: Cannot find OpenSSL's...解决方法 yum install -y libjpeg-devel 错误 configure: error: png.h not found....解决方法 yum install -y libpng yum install -y libpng-devel 错误 configure: error: freetype-config not found...解决方法 yum install -y freetype-devel 错误 configure: error: mcrypt.h not found.
: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys root@node2...'s password: Number of key(s) added: 1 Now try logging into the machine, with: "ssh 'node2'" and...[root@node1 ~]# drbdadm create-md test modinfo: ERROR: Module drbd not found. modinfo: ERROR: Module...[root@node1 ~]# drbdadm up test modinfo: ERROR: Module drbd not found. modinfo: ERROR: Module drbd not...found. modprobe: FATAL: Module drbd not found.
复制代码 代码如下: yum -y install freetype-devel configure: error: xpm.h not found....复制代码 代码如下: yum -y install libXpm-devel configure: error: png.h not found....for XSL support… yes, shared configure: error: xslt-config not found....: xml2-config not found....php $con = mysql_connect("localhost","root","zengjie2"); if (!
错误：configure: error: xml2-config not found. Please check your libxml2 installation....解决办法: yum install -y libxml2-devel 错误：configure: error: Cannot find OpenSSL’s 解决办法: yum install...reinstall the BZip2 distribution 解决办法: yum install -y bzip2 bzip2-devel 错误：configure: error: png.h...解决办法: yum install -y libpng libpng-devel 错误：configure: error: jpeg.h not found....解决办法: yum install -y libjpeg libjpeg-devel 错误：configure: error: png.h not found.
3 安装可能会遇到的报错 3.1 configure: error: Cannot find OpenSSL's 3.2 查看 yum list |grep -i OpenSSL [root.../configure 配置内容 configure: error: Please reinstall the BZip2 distribution [root@xavi php-5.6.30]# yum...install -y bzip2-devel 3.3 configure: error: jpeglib.h not found..../configure 配置内容 3.4 configure: error: png.h not found....root@xavi php-5.6.30]# yum install -y freetype-devel 3.6 configure: error: mcrypt.h not found.
-5.5.23.tar.gz 创建相关账户 [root@localhost src]# useradd -s /sbin/nologin php-fpm 配置编译参数 [root@localhost src...: xml2-config not found....解决办法：yum -y install libjpeg-turbo-devel 错误：configure: error: png.h not found....解决办法：yum -y install libpng-devel 错误：configure: error: freetype-config not found....解决办法：yum -y install freetype-devel 错误：configure: error: mcrypt.h not found.
2. 准备Python环境 要在Python中处理CLIXML数据，你需要准备好XML解析库。...in root.findall('ps:S', namespaces): if error.attrib['S'] == 'Error': results['Error...start_index = clixml_data.find('<Objs') if start_index == -1: return "No tag found...in root.findall('ps:S', namespaces): if error.attrib['S'] == 'Error': results['Error...S="Error">Set-ADAccountPassword : The specified network password is not correct ''' results
领取专属 10元无门槛券
手把手带您无忧上云
云服务器
ICP备案
实时音视频
对象存储
即时通信 IM
