(default) Creating a new host-only adapter produced an error: C:\Program Files\Oracle\VirtualBox\VBoxManage.exe...(default) Progress state: E_INVALIDARG (default) VBoxManage.exe: error: Failed to create the host-only...adapter (default) VBoxManage.exe: error: Assertion failed: [!...(default) Found a new host-only adapter: "VirtualBox Host-Only Ethernet Adapter #5" (default) Windows...failed: VBoxManage.exe: error: Raw-mode is unavailable courtesy of Hyper-V.
ERROR: Job failed (system failure): Error response from daemon: OCI runtime create failed: container_linux.go
1461错误， mysql_stmt_prepare failed! 今天现场咨询我们问如何处理1461错误。 mysql_stmt_prepare failed!...error(1461)Can't create more than max_prepared_stmt_count statements (current value: 16382) 。...FATAL: MySQL error: 1461 "Can't create more than max_prepared_stmt_count statements (current value:...16382)" FATAL: thread#1638: failed to prepare statements for test 查看值 mysql> show global status like...Com_stmt_send_long_data | 0 | +-------------------------+----------+ mysql> set global Com_stmt_close=124000; ERROR
zabbix集成onealert验证报错：create media type failed!...media type failed!...error message:{"jsonrpc":"2.0","error":{"code":-32602,"message":"Invalid params."...,"id":1} 二、报错分析 create media type failed!...error message 创建zabbix媒体失败类型（Media Type）失败，可能该媒体已经存在 思路：用户群组、用户、报警媒介类型、动作都要删除oneitsm。
在： C:\Users\名字\.IntelliJIdea2019.3\config 路径下生成一个文件：idea64.exe.vmoptions
(default) Creating a new host-only adapter produced an error: /usr/local/bin/VBoxManage hostonlyif create...failed: (default) 0%......(default) Progress state: NS_ERROR_FAILURE (default) VBoxManage: error: Failed to create the host-only...adapter (default) VBoxManage: error: VBoxNetAdpCtl: Error while adding new interface: failed to open...machine start: The host-only adapter we just created is not visible.
问题 修改PetaLinux工程的配置文件project-spec/meta-user/conf/petalinuxbsp.conf后，编译出现下列错误，报告“ERROR: Failed to create...: Failed to create workspace directory ERROR: Failed to build project 分析和解决 于是检查PetaLinux工程的编译日志文件build.../build.log，搜索其中的ERROR。...检查ERROR开始的内容，发现一行“ERROR: ParseError at project-spec/meta-user/conf/petalinuxbsp.conf:69: unparsed line...: Failed to build project 结论 PetaLinux工程编译遇到问题时，先看看build/build.log和其它log文件的信息，在检查相关文件，多半能找到解决办法。
创建用户： create user ‘test’@’%’ identified by ‘test’; 显示ERROR 1396 (HY000): Operation CREATE USER failed...可能没有刷新权限 flush privileges; 之后还是不行报错ERROR 1396 (HY000): Operation CREATE USER failed for ‘test’@’%...’ 没办法再删除一次： drop user ‘test’@’%’; flush privileges; 之后create user ‘test’@’%’ identified by ‘test...there, so drop the user After deleting the user, there is need to flush the mysql privileges Now create...the user. http://stackoverflow.com/questions/5555328/error-1396-hy000-operation-create-user-failed-for-jacklocalhost
常见问题2： 如下图所示（Unable to configure the network adapter for the virtual device） ?...安装模拟器的时候他会默认安装虚拟的网卡适配器，一般叫做VirtualBox Host-Only Ethernet Adapter，所以你出现上述问题之1的话就需要检查你的这个IP配置。...解决方案： 第一步，打开网络共享中心，查看你VirtualBox Host-Only Ethernet Adapter的IP是多少？...VirtualBox Host-Only Ethernet Adapter上点击右键选择编辑主机网络，进行配置，同样把我的配置贴出来。...常见问题5：忘记截图了，错误提示是Failed to import OVA 出现这个问题的大部分原因是模拟器读取配置文件不同步，也就是说，比如你删掉了一个模拟器，删除的时候选择了删除其所有文件，但是你下次再创建相同模拟器的时候可能就会出现这个问题
default: Adapter 1: nat default: Adapter 2: hostonly ==> default: Forwarding ports......Error: Nothing to do Unmounting Virtualbox Guest Additions ISO from: /mnt umount: /mnt: not mounted =...default: default: This is not an error message; everything may continue to work properly, default...Vagrant assumes that this means the command failed!...a private network, which allows host-only access to the machine # using a specific IP
Docker-CE 18.09 Overlay网络配置 STEP1 安装并配置主机 使用上述软硬件架构创建3个VMs/hosts，每个host使用两个网络连接：一个桥接网络（网卡名称“enp0s3”）和一个Host-only...网络（网卡名称“enp0s8”） 下面是它们的IP地址和主机名称： Docker Host1 Host-only Adapter 静态IP地址：192.168.56.104 主机名：docker1 Docker...Host2 Host-only Adapter 静态IP地址：192.168.56.105 主机名：docker2 Docker Host3 Host-only Adapter 静态IP地址：192.168.56.106...确保每个节点都可以互相通信（例如在每个主机Ping其他两个Host-only IP地址） STEP2 安装Docker ENGINE（CE） 参考文档：Docker帮助文档1 Docker帮助文档2 STEP3...2375/tcp 4789/udp 7946/udp 7946/tcp STEP6创建overlay网络 创建docker网络，使用-d参数指定overlay驱动 # docker network create
QuitEvent) { LastError = LogError(L"Failed to create event", GetLastError()); goto...Adapter) { LastError = GetLastError(); LogError(L"Failed to create adapter...= ERROR_OBJECT_ALREADY_EXISTS) { LogError(L"Failed to set IP address", LastError);...Session) { LastError = LogLastError(L"Failed to create adapter"); goto cleanupAdapter...Workers[1]) { LastError = LogError(L"Failed to create threads", GetLastError());
[0]), int (adapter.adapt.adapter_address[1]), int (adapter.adapt.adapter_address[2]), int (adapter.adapt.adapter_address...char macAddr[30]; sockfd=socket(AF_INET,SOCK_STREAM,0); if(sockfd<0){ cout<<"create...(hres)) { cout << "Failed to initialize security. " << "Error code = 0x" << hex <<...(hres)) { cout << "Failed to create IWbemLocator object. " << "Error code = 0x" <<...(hres)) { cout << "Query for processes failed. " << "Error code = 0x" << hex << hres
RROR: Could not create cache adapter error=cache factory not found: factory for cache adapter..."" was not registered ERROR: Job failed (system failure): Error response from daemon: OCI runtime create...failed: container_linux.go:349: starting container process caused "process_linux.go:449: container init
背景 虚拟机：VMware 10 操作系统：Linux 64位 数据库：Oracle 11g R2 本地机器：Win 7 64位 虚拟机上网方式选择Host-only,虚机网卡的IP设置为...192.168.0.18,本地机器VMware Network Adapter VMnet1 的IP设为192.168.0.11,虚机与主机能互ping，主机telnet 192.168.0.18 1158...解决办法 在本地浏览器输入的地址为https://oracle.example.com:5500/em/console/aboutApplication 使用的火狐浏览器，显示的错误原因为：ssl_error_weak_server_cert_key
vagrant halt 6、 暂停虚拟机 指令：vagrant suspend 7、恢复虚拟机 指令：vagrant resume 注意： 不管虚机是关闭还是暂停状态，甚至是 error...a private network, which allows host-only access to the machine # using a specific IP...# Create a private network, which allows host-only access to the machine # using a specific IP....default: Adapter 1: nat default: Adapter 2: hostonly ==> default: Forwarding ports......default: 22 (guest) => 2222 (host) (adapter 1) ==> default: Running 'pre-boot' VM customizations... =
docker-machine create --driver hyperv vm https://docs.docker.com/machine/drivers/hyper-v/ 安装完以后重启docker...Linux sudo service docker restart Mac 和 Windows 图形化界面手动重启 然后继续创建： docker-machine create default 名字可以随便起...，不一定要叫default 不报错任何错误，如： Running pre-create checks… Error with pre-create check: "exit status 126" 说明安装成功...) Creating SSH key… (default) Starting the VM… (default) Check network to re-create if needed… (default...) Found a new host-only adapter: "vboxnet0" (default) Waiting for an IP… Waiting for machine to be running
this->displayDevice->Open()) { n_error("SyncRenderApplication: failed to open display device!")...this->renderDevice->Open()) { n_error("SyncRenderApplication: failed to open render device!")...Adapter::Code adapter = Adapter::Primary; if (this->args.HasArg("-adapter")) { adapter...= Adapter::FromString(this->args.GetString("-adapter")); if (this->displayDevice->AdapterExists...(adapter)) { this->displayDevice->SetAdapter(adapter); } } // display
Gem::Ext::BuildError: ERROR: Failed to build gem native extension. ...*** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers...`initialize' activerecord-postgis-adapter (3.1.0) lib/active_record/connection_adapters/postgis_adapter.rb...StandardError: An error has occurred, this and all later migrations canceled: PG::UndefinedObject: ERROR...StandardError: An error has occurred, this and all later migrations canceled: PG::UndefinedObject: ERROR
领取专属 10元无门槛券
手把手带您无忧上云
云服务器
ICP备案
对象存储
腾讯会议
实时音视频
