中国科技期刊卓越行动计划推介：CJA（2025年第2期）

《Chinese Journal of Aeronautics》

Volume 38, No.2, February 2025

CONTENTS

>>本期共发表40篇航空航天相关论文，具体栏目及篇数如下：

Fluid Mechanics and Flight Mechanics (6)

Solid Mechanics and Vehicle Conceptual Design (7)

Electronics and Electrical Engineering and Control (16)

Material Engineering and Mechanical Manufacturing (11)

Fluid Mechanics and Flight Mechanics

Effect of impedance boundary-controlled casing treatment on performance of a fan subjected to inlet swirls

Y. WANG, D. SUN, J. LI, C. GENG, X. DONG and X. SUN

Space-marching inverse design of subsonic, transonic, and supersonic internal flowfields

B. ZHANG, S. YI, Y. ZHAO, R. YANG, Z. ZHU and R. ZENG

Measurement of unsteady force on rotor blade surfaces in axial flow compressor

J. LIU, J. LI, F. PENG, Y. LIU and H. ZHANG

Enhancing box-wing design efficiency through machine learning based optimization

M. HASAN and A. KHANDOKER

Aero-propulsion analysis of distributed ducted-fan propulsion based on lifting-line driven body-force model

H. LIU, X. ZHAO, F. ZHOU, Y. FENG and Y. WANG

Effects of doors on an open cavity flow at Mach number 6

B. NIE, X. HU and Z. LI

Solid Mechanics and Vehicle Conceptual Design

A methodology for aircraft mission effectiveness evaluation and design space exploration based on virtual operational test (Cover article)

H. LIU, Q. GUO, Y. TIAN, K. SUN and C. ZHAO

Energy field intensity approach for probabilistic notch fatigue assessment under size effect

D. LIAO, S. ZHU, J. GAO, X. LI, J. CORREIA, R. CALÇADA and Q. WANG

Novel integration of PSO-enhanced damage mechanics and finite element method for predicting medium–low-cycle fatigue life in perforated structures

Q. XIA, Z. ZHAN, Y. MEI, Y. ZHANG, W. HU and Q. MENG

An experimental study of noise generated by tandem blades

X. TANG, F. TONG, C. WANG, J. DING, G. LI and X. YANG

A nonlinear hysteresis compensation control of hydro-viscous drive in air transport operations

L. WANG, J. LIANG, L. ZHANG, S. WANG and J. WANG

Trajectory analysis and flight modeling of combat aircrafts ejection seats

E. BASTUG, N. SERIN and F. ELALDI

Numerical study on lightning strike protection method for composite rotor blade based on air breakdown and insulating adhesive layer

K. LI, X. CHENG, Z. AN and W. HUANG

Electronics and Electrical Engineering and Control

A LODBO algorithm for multi-UAV search and rescue path planning in disaster areas

L. YANG, X. ZHANG, Z. LI, L. LI and Y. SHI

Output feedback active disturbance rejection control of an electro-hydraulic servo system based on command filter

Y. BAI, J. YAO, J. HU and G. FENG

Three-body cooperative active defense guidance law with overload constraints: A small speed ratio perspective

S. LIU, Z. LIN, Y. WANG, W. HUANG, B. YAN and Y. LI

A model predictive Stackelberg solution to orbital pursuit-evasion game

Y. LIU, C. LI, J. JIANG and Y. ZHANG

Component recognition of ISAR targets via multimodal feature fusion

C. LI, W. ZHU, W. QU, F. MA and R. WANG

Three-dimension collision-free trajectory planning of UAVs based on ADS-B information in low-altitude urban airspace

C. DONG, Y. ZHANG, Z. JIA, Y. LIAO, L. ZHANG and Q. WU

Three-dimensional multi-constraint analytical capture zone against maneuvering targets with velocity advantages

W. CHEN, Y. HU, C. GAO and R. AN

An optimal midcourse guidance method for dual pulse air-to-air missiles using linear Gauss pseudospectral model predictive control method

J. WANG, W. CHEN, L. YANG and X. GONG

Hybrid receptive field network for small object detection on drone view

Z. CHEN, H. JI, Y. ZHANG, W. LIU and Z. ZHU

Distributed event-triggered collision avoidance coordinated control for QUAVs based on flexible virtual tubes

H. GUO, M. CHEN, M. LUNGU and B. LI

Optimizing aircraft-gate reassignment following airport disruptions: A hierarchical column-and-row generation approach

S. ZHU, L. ZHENG, K. CAI, Y. XIONG, Z. LIANG and W. DU

Azimuth-based antenna group delay variation modeling for dual-frequency multi-constellation GBAS

Y. LIU, Y. ZHU, K. FANG and Z. WANG

Unit coordination knowledge enhanced autonomous decision-making approach of heterogeneous UAV formation

Y. WU, H. ZHOU, L. PENG, T. YANG, M. WANG and G. WANG

A deep reinforcement learning framework and its implementation for UAV-aided covert communication

S. FU, Y. SU, Z. ZHANG and L. YIN

Star point positioning for large dynamic star sensors in near space based on capsule network

Z. LIAO, H. WANG, X. ZHENG, Y. ZANG, Y. LU and S. YAO

Predefined-time controller design for a multiple space transportation robots system based on Lp-Norm-Normalized Sign Function

R. TAO, Y. DING, H. LI and X. YUE

Material Engineering and Mechanical Manufacturing

A novel rotor dynamic balancing method based on blade tip clearance measurement without the once per revolution sensor

W. LI, W. WANG, S. ZHANG, J. WANG, Y. LIN and T. LI

Deployment dynamics and experiments of a tendon-actuated flexible manipulator

B. ZHANG, J. SUN and H. HU

Femtosecond laser rotary drilling for SiCf/SiC composites

F. YANG, Z. DONG, R. KANG, H. MA, G. MA and Y. BAO

Effect of fiber breakage defect and waviness defect on compressive fatigue behavior and damage evolution of 3D multiaxial braided composites

Y. SUN, Y. ZHANG, T. LIU, Y. JING, J. MA, Y. LU, C. WANG, X. HE, X. CHEN and W. FAN

A numerical method for predicting bursting strength of composite rocket motor case considering filament winding process-induced stress

J. LIANG, F. ZHAO, D. WU and A. DING

Geometric size and forming force prediction in incremental flanging: A new analytical model

C. TIAN, D. ZHANG, G. YANG and S. ZHAO

Effects of microstructures on deformation and damage of thermomechanical fatigue in nickel-base single crystal superalloys

C. LUO and H. YUAN

A parameter-variant trochoidal-like tool path planning method for chatter-free and high-efficiency milling

Z. LI, J. NIU, S. SUN and Y. SUN

Modelling and experimental investigation of micro-dimpled structures milling with spiral trajectory tool reciprocating motion

G. WANG, L. ZHAO, Q. LIU, X. LI, Y. SUN and M. CHEN

Microbial fouling induced by typical extreme environment-resistant bacteria in oligotrophic solutions of simulated condensate of manned spacecrafts

Y. FENG, J. CHEN, Q. LIU, N. CHEN, L. LU, C. DONG and K. XIAO

Flow field design and experiment of high-efficiency electrochemical milling with large machining area

S. WANG, J. LIU, C. BAO and D. ZHU