注意说明
本文档适用于 CentOS 操作系统的多个版本,包括 CentOS 6、CentOS 7、CentOS 8 以及 CentOS 8-stream。这意味着无论您正在使用哪个版本的 CentOS,您都可以参考本文档来获取相关的帮助和指导。这为广大 CentOS 用户提供了极大的便利,无需担心版本差异带来的使用障碍。
操作背景
CentOS 6、7、8、8-stream 操作系统当前已进入版本生命周期终止状态(EOL),Linux 社区不再维护该操作系统版本。按照社区规则,对应版本的源地址
http://mirror.centos.org/centos/x/
内容已移除,且目前第三方的镜像站中均已移除相关仓库。腾讯云的源 https://mirrors.tencent.com/
和http://mirrors.tencentyun.com/
也无法同步到 ,当您在腾讯云上继续使用旧路径的源会发生报错。说明(以 CentOS Stream 8为例):
CentOS Stream 8 构建工作结束时间:2024年5月31日。
在2024年5月31日之后,CentOS Stream 8 将被归档,将不再提供更新。
迁移/升级选项:
迁移到 CentOS Stream 9。
转换为 RHEL 8,在某些条件下使用免费许可证。
将转换为企业 Linux 生态系统中的另一个操作系统。几个项目已经从 CentOS 和 RHEL 源代码派生出新的操作系统。
这些软件包将在2024年5月31日之后归档至 vault.centos.org(腾讯云地址 Index of /centos-vault/)。
详情请参见:
操作步骤(以 centos 6为例)
1. 使用标准方式登录 Linux 实例(推荐)。您也可以根据实际操作习惯,选择其他不同的登录方式:
2. 执行以下命令,查看当前操作系统 CentOS 版本。
cat /etc/centos-release
返回结果如下图所示,则说明当前操作系统版本为 CentOS 6.9。
3. 执行以下命令,编辑
CentOS-Base.repo
文件。vim /etc/yum.repos.d/CentOS-Base.repo
4. 按 i 进入编辑模式,根据 CentOS 版本及网络环境修改 baseurl。
说明:
内网访问需切换为:
http://mirrors.tencentyun.com/centos-vault/6.x/
源。公网访问需切换为:
https://mirrors.tencent.com/centos-vault/6.x/
源。本文以实例操作系统为 CentOS 6.9,使用内网访问为例。修改完成后
CentOS-Base.repo
文件如下图所示:
配置如下,您可按需获取:
[extras]gpgcheck=1gpgkey=http://mirrors.tencentyun.com/centos/RPM-GPG-KEY-CentOS-6enabled=1baseurl=http://mirrors.tencentyun.com/centos-vault/6.9/extras/$basearch/name=Qcloud centos extras - $basearch[os]gpgcheck=1gpgkey=http://mirrors.tencentyun.com/centos/RPM-GPG-KEY-CentOS-6enabled=1baseurl=http://mirrors.tencentyun.com/centos-vault/6.9/os/$basearch/name=Qcloud centos os - $basearch[updates]gpgcheck=1gpgkey=http://mirrors.tencentyun.com/centos/RPM-GPG-KEY-CentOS-6enabled=1baseurl=http://mirrors.tencentyun.com/centos-vault/6.9/updates/$basearch/name=Qcloud centos updates - $basearch
5. 按 ESC 输入 :wq 后,按 Enter 保存修改。
6. 执行以下命令,修改
CentOS-Epel.repo
文件。vim /etc/yum.repos.d/CentOS-Epel.repo
7. 按 i 进入编辑模式,根据实例网络环境修改 baseurl。
本文以使用内网访问为例,则将
baseurl=http://mirrors.tencentyun.com/epel/$releasever/$basearch/
修改为 baseurl=http://mirrors.tencentyun.com/epel-archive/6/$basearch/
即可。修改完成后如下图所示:
配置如下,您可按需获取:[epel]name=epel for redhat/centos $releasever - $basearchfailovermethod=prioritygpgcheck=1gpgkey=http://mirrors.tencentyun.com/epel-archive/RPM-GPG-KEY-EPEL-6enabled=1baseurl=http://mirrors.tencentyun.com/epel-archive/6/$basearch/
8. 按 ESC 输入 :wq 后,按 Enter 保存修改。
9. 至此已完成 YUM 源切换,您可使用
yum install
命令安装所需软件。一键配置(操作前请清理 /etc/yum.repos.d/ 目录下的残留配置)
CentOS 7 使用命令:
curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.tencent.com/repo/centos7_base.repo
CentOS 8 使用命令:
curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.tencent.com/repo/centos8_base.repo
CentOS 8-Stream 使用命令:
curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.tencent.com/repo/centos8-stream.repo