因此,在前面的一个问题中,我问过关于使用公共类和宾果实现泛型接口的问题,它是有效的。但是,我想传递的类型之一是内置的可空类型,如: int、Guid、String等。
这是我的界面:
public interface IOurTemplate<T, U>
where T : class
where U : class
{
IEnumerable<T> List();
T Get(U id);
}
所以当我这样做的时候:
public class TestInterface : IOurTemplate<MyCustomClass,
我正在一个大型数据库上执行模式更改,纠正古老的设计错误(将主键及其对应的外键从INTEGER扩展到BIGINT)。基本程序是:
关闭我们的application.Drop DB触发器和constraints.Perform更改(每个表和主/外部key).Recreate的ALTER TABLE foo ALTER COLUMN bar TYPE BIGINT、触发器和约束(NOT VALID).Restart application.Validate the constraint). (每个constraint).的ALTER TABLE foo VALIDATE CONSTRAINT bar
我正在使用下面给定的GA代码。我想知道按照哪个序列ga生成可行的解。?它将满足第一个线性或非线性的约束?如果这两种约束都不满足,它会给出什么样的解决方案?是否有任何程序对约束进行优先排序(例如必须满足其中一个约束)?
%cost_1 is Objective function, reli_1 is nonlinear constraint function
%time_1 is matrix containing time of different components and no. of components = NoOfVariable
lb=zeros(NoOfVariables,
在一个运行良好的应用程序上,我只是在代码和故事板中进行了字符串转换,然后,我得到了一个“无法同时满足约束”的错误。
错误是:
Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find
我正在学习Z3 (目标函数)教程,并遇到了以下示例:
(declare-const a Bool)
(declare-const b Bool)
(declare-const c Bool)
(assert-soft a :weight 1 :id A)
(assert-soft b :weight 2 :id B)
(assert-soft c :weight 3 :id A)
(assert (= a c))
(assert (not (and a b)))
(check-sat)
(get-model)
我不明白Z3的输出:
A |-> 0
B |-> 2
s
在玩Haskell交互提示(ghci)时,我遇到了一些奇怪的东西。下面的代码在ghci 7.0.4下运行
[minBound..1]
引发以下异常:
<interactive>:1:12:
Ambiguous type variable `t0' in the constraints:
(Num t0) arising from the literal `1' at <interactive>:1:12
(Enum t0) arising from the arithmetic sequence `minBound ..
我正在学习AMPL以后在我的程序中使用它。我有一个小问题想要解决。正如标题所述,我试图使用一些迭代操作来最小化约束的数量。因此,问题如下:假设我有2组A、和B,并假设我有代码:
set A:= (1, 2, 3) (4, 5, 6);
set B:= a b c;
var x{A,B} binary;
**some_objective** ;
subject to constraint { (i,j,k) in A, b in B }: x[i,b] + x[j,b] + x[k,b] <= 1;
现在,如果我们扩展以前的约束,将形成以下约束:
x[1,a] + x
假设我有以下C#接口:
public interface IInterface<T> where T : SomeClass
{
void InterfaceMethod();
}
SomeClass的定义如下:
public class SomeClass
{
public void SomeMethod();
}
现在我想定义接口的实现,它不会编译:
public class InterfaceImpl<T> : IInterface<T>
{
public void InterfaceMethod()
{
我需要一个列表,其中所有项目都扩展了A类并实现了接口I。另外,A类可能是层次结构中的多个父级。
如果所有的类都是A类的直接后代,我可以只使用一个抽象类来实现I作为泛型并使用它,但是我的用例不允许这样做。
有没有办法告诉一个列表,它的元素必须同时扩展类A和实现接口i?List<A,I>?如果不是的话,还有别的办法吗?
示例代码:
public class A
{
// Class belongs to a third party library
}
public class B : A
{
// Class belongs to a third party libr
我对iOS 7中的Autolayout自定义iOS有问题。该单元似乎显示正确,但我得到了大量调试控制台输出,如下所示:
Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the cod