我在Kovan测试网络上。
当我将1ETH从帐户#1转移到帐户#2时,事务处理完成后,我看到以下内容:
Provided 21,000 gas (20,000M/ETH) for a total transaction value of 1.00042 ETH
谁来付汽油费?我认为这应该是1号账户,所以我预计余额会减少1.00042ETH,但它只减少了1ETH。
在天然气消耗和支付方面,Kovan网络与主网络有何不同?
我有一个有两个接口的Ubuntu16.04系统-- eth0配置了DHCP,eth1配置了静态ip地址。
/etc/network/interfaces文件具有以下配置
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet dhcp
# The Secondary network interface
auto eth1
iface eth1 inet static
address 10.10.1.10
我关闭了我的无头文件服务器,没有gui文件服务器来替换一个已捕获的风扇,现在eth0接口没有通过DHCP获取IP地址;在引导过程中,它只是“等待网络配置”,并最终超时。
/etc/网络/接口
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
在https://ethdrop.dev的帮助下,我可以使用0.001 ETH ( kovan test network )获得测试帐户,还可以使用remix ide部署智能合约。 我使用truffle创建了一个可靠的项目,并且我正在尝试部署到测试网络(kovan),而不是本地主机(Ganache)。 但是,对于测试帐户,有一个错误:no enough gas to deploy 如何获得更多测试eth? 或者,我必须用钱来解决这个问题?
几天前,我的一个备份服务器上的内部接口中断了,从那以后,我一直无法让它正常工作。在dmesg,我看到:
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bnx2: eth1: using MSI
ADDRCONF(NETDEV_UP): eth1: link is not ready
bnx2: eth1 NIC Copper Link is