shady@shady:~$ sudo update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-3.13.0-76-generic
Found initrd image: /boot/initrd.img-3.13.0-76-generic
Found linux image: /boot/vmlinuz-3.13.0-74-generic
Found initrd image: /boot/initrd.img-3.13.0-74-generic
Found linux image
升级到10.10之后,我在启动ubuntu时遇到了麻烦。
在状态为0x0009的意外退出之后,它说:
Gave up waiting for root device: common problems:
- Boot args (cat /proc/cmdline)
- check rootdelay = (did system wait long enough?)
- Check root = (did the system wait for the right device?)
- Missing moduloes (cat /proc/modules; ls /dev)
ALERT! /d
我以为我终于找到了解决我的问题的办法,因为我不够聪明,不足以删除“清理旧内核”所不需要的内核/标题,这多亏了byobu。它对内核非常有用(谢天谢地,因为这是它的名字),但是对于头包来说,它工作得不太好。它似乎只删除了通用包,根本不触及基本包。
示例:
# dpkg -l | grep linux-header
ii linux-headers-4.4.0-101 4.4.0-101.124 all Header files related to Linux kernel version 4.4.0
在我的开发环境中,我得到了一个内核oops。有人建议我的守护进程之一正在制作内核oops。
这对我来说很有趣。根据定义():
"oops is a deviation from correct behavior of the Linux kernel - one which produces a certain error log "
因此,异常将出现在内核代码中。我做了一些进一步的搜索,但没有找到确切的答案。
请有人澄清一下,内核oops是否可以由任何用户进程生成?
P.S.:我知道内核代码在某些用户进程上下文中执行(在上下文切换之后),但是在上下文切换之后,内核代码正
除了降级之外,还有谁知道在升级到内核4.0之后修复TP-Link Tl821N无线连接的解决方案?没有无线适配器的信息。
kde中的网络图标是红色的,wifi连接不出现在菜单上连接,无法连接到Internet。
lsusb:
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hu
蓝牙模块正在“工作”,但根本没有检测到任何设备。我安装了https://github.com/lwfinger/rtlwifi_新的和rtl8723au_bt-内核,然后按照Pilot6 6‘S在本文中的说明:RTL8723BE蓝牙不工作并最终安装了所有的东西,但仍然没有检测到任何东西。也许我应该在安装飞行员6‘S之前卸载第一个驱动程序?另外,我无法使用apt下载rtl8723au-bt,我不得不从网上下载.deb并运行安装程序。请帮帮我,我不知道还能做什么。
lsusb说:
Bus 001 Device 002: ID 8087:07e6 Intel Corp.
Bus 001 Devic
乌本图20.04我使用包安装了virtualbox;它成功了,我创建并运行了一个RM。但是在软件更新之后就停了下来。我不能运行VM,消息说:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver is either not loaded or not set up correctly.
Please reinstall virtualbox-dkms package and load the kernel module by executing
'modprobe vboxdrv'
当我今天早上第一次启动我的计算机时,我开始收到连续的System program problem detected警报。现在,我的IDE (Intellij,Android )完全拒绝打开,并且试图启动它们会导致更多的System program problem detected警报。
我已经诊断出这个问题了。下面是sudo ls -l /var/crash/的输出:
total 12
-rw-r--r-- 1 kernoops whoopsie 1666 Aug 16 11:34 linux-image-3.13.0-155-generic.101926.crash
-rw-r--r-- 1
USB端口在我启动我的笔记本电脑后停止工作,甚至在重新启动几次之后也没有工作。没有检测到什么,但它用usb线给我的手机充电。总的来说,我对Linux很陌生。
HP 15笔记本电脑产品编号: G1V01UA#ABA
lsusb的输出:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
我不知道该怎么做,因为我的吊坠得到温暖时,连接,但我的电脑不认识它。
模块vfat在引导时不加载,并且试图强制modprobe vfat问题产生错误
modprobe: ERROR: could not insert 'vfat': Unknown symbol in module, or unknown parameter (see dmesg)
带着dmesg线
[ 663.227894] fat: Unknown symbol __bread_gfp (err 0)
[ 663.227924] fat: Unknown symbol __getblk_gfp (err 0)
在启动时还有两条失败消息建议我运行systemctl stat
我已经使用以下方法建立了一个监视器界面:
iw dev wlan0 interface add mon0 type monitor
ifconfig mon0 up
我正在使用libpcap捕捉和检查802.11帧和无线电抽头。我以前使用过以下Linux内核:
Linux armada 3.10.103-marvell armv7l GNU/Linux
我现在使用:
Linux armada 4.13.4-mvebu 2017 armv7l GNU/Linux
在使用旧内核时,我能够监视在wlan0接口上发送的所有RX和TX数据包。但是在新内核上,只看到RX数据包。我发现在运行tcpdump