在我的任务中,我需要在本地linux机器中转储dhcp客户机-服务器交换。
首先,我从ISC dhcp源- https://github.com/isc-projects/dhcp克隆和构建dhcp服务器和客户端。
为我的实验在桥中创建和设置点击接口:
sudo ip link add test_eth0 type tap
sudo ip link add test_eth1 type tap
sudo ip link add test_eth2 type tap
sudo ifconfig test_eth0 up
sudo ifconfig test_eth1 up
sudo ifcon
我现在正试图通过qemu直接托管两个am,而没有像libvirt这样的工具。
我确实为每个用户设置了桥接/点击接口,如
ip link add br0 type bridge
ip addr add 192.168.122.1/24 dev br0
ip link set br0 up
ip tuntap add mode tap tap0
ip link set tap0 master br0
ip link set tap0 up // tap1 as well
并通过命令启动VM:
qemu-system-x86_64 -enable-kvm -m 1G \
-
我试图将我的旧路由器转换为新路由器的接入点,我在新路由器的范围内分配了一个IP地址,当我禁用DHCP时,还有另一个选项是Relay,当激活时,您必须填充一个字段"DHCP Server for IP Relay Agent“。所以我的问题是,这两种选择有什么区别?我知道我试图使用中继选项,我进入DHCP服务器作为新的路由器和它的工作,我得到了互联网接入和动态IP。如果我检查了IP分配的禁用选项,旧路由器是自己选择配置,还是我以错误的方式看待这个主题,会有什么不同?
📷
如果我可以问一下,“方向”的设置是否会影响这个操作?因为它被设置为零。
我使用以下命令将Linux盒配置为开关模式:
ip link add name switch type bridge
ifconfig switch 192.168.1.2
ip link set switch up
ip link set swp0 master switch && ip link set swp0 up
ip link set swp1 master switch && ip link set swp1 up
ip link set swp2 master switch && ip link set swp2 up
ip li
我想在一个小型linux设备上与一个特殊的IP地址通信,该设备有两个以太网接口,在桥上使用。
这座桥是这样架设的:
# Delete bridge if it exists
ip link delete $BRIDGE_IF type bridge
# Prepare device-facing interface
ip link set dev $DEVICE_IF down
ip address flush dev $DEVICE_IF
ip address add 0.0.0.0 dev $DEVICE_IF
ip link set dev $DEVICE_IF up
# Prepa