我有一个USB产品的供应商和产品代码: 0403:6001。 我想知道如何才能轻松地将lsusb命令的结果与/dev/ttyUSB*上设备的确定联系起来 lsusb给我 Bus 001 Device 004: ID 065a:a001 First device
Bus 001 Device 003: ID 0403:6001 Second device FT232 USB-Serial (UART)
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:
我最近发现我的计算机有一个USB3条目:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
但是遗憾的是,我只有USB2条目,所以我想找到一个是,然后用一个USB3替换它。
我在寻找Bus 002的物理位置时遇到了一些问题,我该怎么做呢?
我首先尝试在每个端口上插入一个u
我对Ubuntu很陌生。所以,我买了一个适配器通过USB连接以太网,但它只显示连接。它可以在窗口和薄荷上工作,但不适用于Ubuntu。请帮帮忙。我用的是ubuntu 22.04。这是我从运行lsusb中得到的
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 8087:0a2b Intel Corp. Bluetooth wireless interface
Bus 001 Device 003: ID 13d3:5a07 IMC Networks
我正试图使用与GBA ST2 Bill进行通信.所有东西在Windows上都能正常工作(然后设备连接到一个COM端口上),但在Linux上就不行了(到目前为止,Ubuntu14.04、16.04和Debian 8)。
默认情况下,使用cdc_acm驱动程序--它附加到/dev/ttyACMx,但它不响应任何请求。(然而,当请求时,在睡眠模式下,它会立即醒来)。
dmesg和lsusb的相关输出
$ dmesg
[26600.821389] usb 2-1: new full-speed USB device number 37 using ohci-pci
[26601.307233] usb
我在我的联想G500笔记本电脑上安装了Ubuntu18.04,由于某种原因蓝牙不起作用。我想甚至都没被发现。有什么帮助吗?
运行lsusb将给出以下内容
$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Read
我最近发现lsusb命令是在解决耳机问题时发现的。
我的笔记本电脑运行debian,目前还没有任何USB接口,但是当我运行"lsusb“命令时,仍然可以得到相当多的输出:
root@t500:~# lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bu
我不知道如何让我的usb wifi适配器被iwconfig识别。当我在终端输入'lsusb‘时,我会把它拿回来:
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
我最近购买了奥基WF-R13,尽管它是随Linux驱动程序在磁盘上出现的,但我在编写自述自述的故事时遇到了麻烦。它有一个makefile,但我似乎不能运行./configure。运行make似乎出错了。
如果我运行lsusb,它将显示为
总线004设备003: ID 0e8d:7612 MediaTek Inc.
iwconfig不显示任何无线设备。
有什么想法吗?
我的主板STM32F446有一个片上调试器(STLINK v2),我试图在Linux环境中调试我的可执行文件(Virtual = Ubuntu,host os = windows 10)。我无法在USB设备列表中看到stlink调试器,即lsusb没有显示任何stlink设备。虽然我确实在Linux中安装了stlink工具,并更新了udev规则2,但无法看到openocd与STM32板进行交互,我想#1是造成这种情况的根本原因。
lsusb输出
$ lsusb
Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet
Bus 001 Devi
我已经在我的Archos 43互联网平板电脑(Android 2.3.26)上打开了USB调试,但adb没有检测到该设备。
我有Kubuntu 11.04。
shell命令“lsusb”的输出:
michael@schlepptop777:~/.android_sdk/platform-tools$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 00
我在检测usb闪存方面有问题。我用了这个命令
lsusb
Bus 002 Device 008: ID 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 048d:c100 Integrated Technology Express, Inc.
Bus 001 Device 003: ID 5986:2113 Acer, Inc
Bus 001 Dev
lsusb的产出:
Bus 002 Device 004: ID 0846:9054 NetGear, Inc.
并且来自iwconfig:
lo no wireless extensions.
enp0s25 no wireless extensions.
我是linux的新手,目前正在从我的windows桌面连接任何帮助都很感谢。
Linux发行版: CentOS Linux7.4.1708(核心)
内核:3.10.0-693.2.el7.x86_64
问题:
# lsusb
lsusb: error while loading shared libraries: libusb-1.0.so.0: cannot open shared object file: No such file or directory
# ldd /usr/bin/lsusb
linux-vdso.so.1 => (0x00007ffd446e0000)
libusb-1.0.so.0 => not found
libc.so
一开始,当我试图访问我的手机的SD存储时,我遇到了一个错误。然后,当我试图修复它时,我设法把它弄得更糟了。所以,现在当我把手机插上电源时,它就不会出现了。但是,如果运行lsusb,则会得到以下输出:Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2883 Sunplus Innovation Technology I
我试图在HP Stream 11 Pro G3笔记本电脑/82A9上安装Linux,并需要eMMC主机控制器制造商的名称,这样我就可以知道在Linux内核中要启用哪些驱动程序。
我尝试了lspci和lsusb,但在它们的输出中找不到任何有用的信息;同样地,对于mmc-utils. 的mmc,我的笔记本电脑有一个读卡器,控制器是Realtek。然而,没有提供关于eMMC控制器的其他信息。
来自lspci的输出:
📷
来自lsusb的输出:
$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001
我安装了一个asus vivobook pro,安装了ubuntu17.10,我花了几天的时间试图弄清楚如何设置和使用指纹扫描仪。指纹-gui和fprint都没有看到任何可用的设备。这是lsusb:Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 8087:0a2b Intel Corp. Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
我在我的HP Envy x360上使用Ubuntu20.04LTS。LSUSB检测指纹扫描仪,但FPRINTD不检测硬件。既然LSUSB检测到了,我有可能让它开始工作吗?
phenom@PhenomFire:~$ lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 04f3:0c4c Elan Microelectronics Corp. ELAN:ARM-M4
Bus 003 Device 003: ID 0408:542a Quanta Computer,
在我的笔记本上,运行Ubuntu16.04LTS的每个USB端口都停止工作了。我在终端中执行了lsusb,并得到了以下提示:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6
对于我附带的一个USB设备(2773:0104),我在lsusb命令输出中没有看到任何描述:
user@Thinkpad-Laptop:~/binaries$ lsusb
Bus 008 Device 002: ID 0a5c:217f Broadcom Corp.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 036: ID 2773:0104
USB描述
我有一个不工作的游戏垫,我说“不工作”,因为我在玩城市恐怖和游戏没有响应的游戏垫按钮按下。我怎样才能让游戏垫工作呢?
我在其他游戏中试过了,SuperTuxKark,敌人领地.但是,同样,没有响应任何游戏垫按钮按下。
这是lsusb的输出
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 0079:0011 DragonRise Inc.
Bus
我无法在蓝牙中找到任何设备,而且当蓝牙打开时,任何设备都不会检测到我的系统。我需要安装蓝牙的驱动程序吗?
编辑:它检测到我的蓝牙耳机,但未能配对,它没有检测到任何其他蓝牙设备。
lsusb; dmesg | egrep -i 'blue|firm'输出
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:b721 Realtek Semiconductor Corp.
Bus 001 Device 002: ID 04f2:b52b Chicony
我有一个Thinkpad X1碳。我跟着这些指示,但没有结果。
lsusb的输出是:
sguha@ajgubi:~$ lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 0
Ubuntu没有将我的USB驱动器检测为可装入的卷,但它显示在磁盘中,如下面的屏幕截图所示:
📷
我能做些什么来格式化这个驱动器?
lsusb输出为
美元b
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 1f75:0916 Innostor Technology Corporation
Bus 003 Device 001: ID 1d6b:0003 Linux Found