在下面的配置中,aaa是什么意思?
aaa authentication login CON local
aaa authentication login VTY group VTY local
aaa authentication dot1x default group DOT1x
aaa authorization exec VTY group VTY if-authenticated
在我的设备配置中,它有show running-config和start-up config,这两个配置都使用了相同的vty线路,例如
show running-config
line vty 0 4
access-class 20 in
password 7 373737
login authentication test
exec-timeout 10
transport input ssh
line vty 5 15
access-class 20 in
password 7 373737
login authentication test
exec-timeout
我需要一个脚本,可以从思科配置文本文件中提取line vty 0 4部分。有人能推荐一种使用powershell/regex的方法吗?
ex:我需要下面的块测试,并将其输出到一个文件,或者仅仅是一个屏幕输出。
line con 0
exec-timeout 10 0
timeout login response 30
privilege level 1
special-character-bits 7
exec
line vty 0 4 >STARING AT THIS LINE
access-class VTY-ACL in
motd-banner
exec-ban
几天前刚刚更新了GHC和阴谋集团,现在很多封锁线无法建造。
$ ghc --version
The Glorious Glasgow Haskell Compilation System, version 7.8.2
$ cabal --version
cabal-install version 1.18.0.3
using version 1.18.1.3 of the Cabal library
我可以安装vty,但不能安装vty-ui。我有以下错误:
$ cabal install vty-ui
Resolving dependencies...
In order, the foll
我已经设置了一个Windows2012Server R2 Radius服务器来与CISCO设备通信。
有两类用户:只具有只读权限(shell:priv-lvl=1)和读/写(shell:priv-lvl=15)。
GNS3上的路由器配置非常简单:
aaa authentication login VTY group RAD1 local
aaa authorization exec AUTH_VTY group RAD1 local if-authenticated
line vty 0 20
login authentication VTY
authorization exec AUT
下面是vty行的运行配置:
line vty 0 4
password 1111
login local
transport input ssh
line vty 5 15
password 1111
login local
transport input ssh
但是,当我键入ssh -l域名ip地址时,cmd将显示:
Open
Password:
因为它是在login local中,所以它应该要求一个用户帐户,但它没有。而且,它接受密码"1111",据我所知,只有在login中才能接受。
我试着把它安装在windows 7,32位上。最后得到了一个错误:
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's
我的防火墙,iptables Linux盒只有一个以太网端口。
我的网络拓扑非常简单,看起来如下所示:
ISP (Port Gi 1/1) -> Switch <-Firewall on Port Gi 1/2
^
|
Other devices Gi 1/3 - Gi 1/48
在我的防火墙上,eth0接口可以在同一个eth0接口(作为网关/ DHCP服务器)上同时具有一个dhcp地址(来自ISP)和一个私有192.168.x.x地址。
NATing从我的专用网络到我的IS
我正在构建一个脚本来解析来自开关配置文件的数据,并且遇到了一些小问题(使用Python3.5)
下面是我正在尝试完成的伪代码:
if re.match(patter0):
continue to match pattern1
if re.match(pattern1):
test if < 10 minutes
return pass or fail
到目前为止,我已经尝试了许多变体,包括for-in循环、while循环和嵌套的if语句,但是我没有得到任何进展。
def net1639andnet1624(input_file):
我正在使用cisco数据包跟踪程序6.2的学生版本。
我有两个vlans连接到同一个路由器,但它们不能互相切换。这是我的路由器和交换机的配置。
我的路由器:
version 12.4
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
hostname Router
ip dhcp excluded-address 192.168.10.254
ip dhcp excluded-address 192.168.20.254
在这里,我无法使用DHCP自动获得ip。
📷
下面是具有DHCP的swtich0的配置。
Switch#sh run
Building configuration...
Current configuration : 1237 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Switch
!
!
ip dhcp excluded-address 192.
就在这一点上,我有课点,线
public class Point
{
public double X{get;set;}
public double Y{get;set;}
public Point(double x, double y) { this.X = x, this.Y = y}
}
public class Line
{
public Point StartPoint { get; set; }
public Point EndPoint { get; set;
两个VLANS都在工作,从R1到R0的ping也成功地工作了,反之亦然。但是当我从粉红色的PC机切换到蓝色的PC机时,我得到了无法到达的目的地,当我从蓝色的PC机发送到粉红色的PC机时,我得到请求超时的时间。错误在哪里?
📷
SW0配置:
SW0#show running-config
Building configuration...
Current configuration : 1129 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug dateti